我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular DDR5 RDIMM module with black chips, no heat spreader, 288 gold pins visible

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 ECC RDIMM 1Rx8 CL40 1.1V SuperMicro SYS-121H-TNR SYS-221H-TNR SYS-221H-TN24R

SKU CH-0KFJ-HXZHC

16 GB DDR5 4800 ECC RDIMM module for SuperMicro Hyper SuperServer systems

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 4800 ECC RDIMM boosts server throughput
  • CL40 1.1 V registered design keeps data integrity high
  • 1Rx8 288-pin module fits Supermicro SYS-121H-TNR SYS-221H-TNR SYS-221H-TN24R
  • Major Samsung Micron Hynix chips deliver enterprise-grade reliability
  • Single 16 GB stick simplifies capacity scaling

16 GB DDR5 ECC RDIMM for Supermicro servers

This 16 GB DDR5 4800 module is built for Supermicro Hyper SuperServer models SYS-121H-TNR, SYS-221H-TNR and SYS-221H-TN24R. It uses registered ECC RDIMM architecture with a 1Rx8 layout to deliver error-correcting stability for mission-critical workloads. The 288-pin form factor fits directly into compatible server motherboards without adapters.

Thermals and power in normal use

Operating at 1.1 V, the module runs at standard DDR5 voltage to keep power draw low inside dense chassis. No heat spreader is fitted, so airflow across the PCB handles cooling in typical server environments. Registered buffering reduces electrical load on the memory controller during sustained operation.

The specification that decides fit

The module must match DDR5 4800 PC5-38400 with CL40 latency, 1.10 V voltage, 1Rx8 rank and registered ECC RDIMM format. Supermicro SYS-121H-TNR, SYS-221H-TNR and SYS-221H-TN24R systems require this exact combination for correct operation.

商品特色

  • 16 GB DDR5 4800 ECC RDIMM boosts server throughput
  • CL40 1.1 V registered design keeps data integrity high
  • 1Rx8 288-pin module fits Supermicro SYS-121H-TNR SYS-221H-TNR SYS-221H-TN24R
  • Major Samsung Micron Hynix chips deliver enterprise-grade reliability
  • Single 16 GB stick simplifies capacity scaling

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

商品問答

How do I install this 288-pin DDR5 RDIMM in a SuperMicro SYS-121H-TNR, and which step is often missed?

Align the module notch with the slot key, press straight down until both retention clips click, then verify the system detects the full 16GB at 4800MHz in BIOS.

What maintenance or replacement will this ECC RDIMM need over its service life?

No routine maintenance is required; ECC corrects single-bit errors on the fly, and the module should only be replaced if diagnostics report uncorrectable errors or capacity loss.

What limit appears first when this CL40 1.10V module runs sustained workloads?

The CAS latency of CL40 sets the timing floor, so sustained throughput is bound by the 4800MHz rated speed and 1Rx8 organisation rather than thermal throttling.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。