我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 ECC RDIMM 1Rx8 CL40 288-Pin memory upgrade

SKU CH-0M2J-2WK40

16GB DDR5 4800 ECC RDIMM 1Rx8 CL40 1.10V 288-pin registered server memory for HPE systems

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 4800 ECC RDIMM boosts server throughput
  • Registered 1Rx8 design with CL40 latency stabilises heavy workloads
  • 1 V operation reduces power draw in HPE platforms
  • Samsung, Micron or Hynix chipsets ensure enterprise-grade reliability
  • 288-pin form factor fits HPE P58354-H21 and P62601-B21 systems

NEMIX RAM 16GB DDR5 4800 ECC RDIMM

This NEMIX RAM module provides 16GB of DDR5 ECC registered memory for compatible HPE servers and workstations. It operates at 4800MHz with a CAS latency of CL40 and a voltage of 1.10V. The single-rank 1Rx8 design uses major OEM chips from Samsung, Micron or Hynix. The 288-pin RDIMM form factor fits registered DIMM slots in qualified HPE systems.

Suited for HPE servers needing registered ECC memory

This module suits administrators upgrading HPE servers such as those using part numbers P58354-H21 or P62601-B21 where registered ECC RDIMMs are required. It is not suitable for platforms that accept only unbuffered UDIMM memory or for desktop PCs lacking registered DIMM support. Buyers needing non-ECC memory or higher capacity per module should look at other configurations.

Registered ECC RDIMM with CL40 latency

The defining specification is the registered ECC RDIMM architecture combined with CL40 latency at DDR5 4800 speed. This combination determines compatibility with HPE server memory controllers that require registered buffering and error correction. Verify the system qualified vendor list for the exact part number MR38400-618K1 before ordering.

商品特色

  • 16 GB DDR5 4800 ECC RDIMM boosts server throughput
  • Registered 1Rx8 design with CL40 latency stabilises heavy workloads
  • 1 V operation reduces power draw in HPE platforms
  • Samsung, Micron or Hynix chipsets ensure enterprise-grade reliability
  • 288-pin form factor fits HPE P58354-H21 and P62601-B21 systems

商品規格

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHPE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

商品問答

How do I install this 288-pin DDR5 RDIMM in my HPE server and what is the common mistake?

Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the ejector clips lock, then verify the system recognises the 16 GB at 4800 MT/s. The step often missed is seating the module fully so both clips engage; a partial insert causes boot errors.

What maintenance or replacement will this ECC RDIMM need over its service life?

The module has no heat spreader and no moving parts, so no routine maintenance is required. If a correctable error count rises above the platform threshold, the DIMM should be replaced; otherwise it runs for the server's lifetime.

What limit appears first when this 1Rx8 CL40 1.1 V module runs sustained workloads?

The primary limit is the CL40 latency at 4800 MT/s; sustained bandwidth is capped by the single-rank 1Rx8 organisation and the 1.1 V JEDEC voltage, so throughput plateaus before thermal throttling becomes a factor.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。