我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 16GB DDR5 6400 CL52 1Rx8 ECC Registered RDIMM memory upgrade

SKU CH-V4ZQ-4TKYM

16 GB DDR5 6400 CL52 1Rx8 ECC registered RDIMM validated for Supermicro H13SSL-NT

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Exact-match DDR5-6400 CL52 1Rx8 ECC RDIMM runs at rated speed
  • 288-pin registered form factor fits Supermicro H13SSL-NT motherboard
  • Registered architecture offloads controller for full-slot stability
  • ECC corrects single-bit errors preventing silent data corruption
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR5 RDIMM for Supermicro H13SSL-NT

This 16GB DDR5 6400 CL52 1Rx8 ECC Registered RDIMM is built to the exact rank, voltage and timing the Supermicro H13SSL-NT motherboard expects. The module is recognised at full capacity and runs at its rated 6400 speed without manual tuning. It is intended for administrators upgrading or populating that specific server platform.

288-pin registered form factor with no heat spreader

The 288-pin RDIMM fits only registered DIMM slots; it will not work in UDIMM or SODIMM sockets. Registered buffering offloads the memory controller so every slot can run fully populated at full capacity. ECC corrects single-bit errors on the fly to stop silent data corruption. The bare PCB has no heat spreader, so airflow across the module must be provided by the server chassis.

16GB capacity at DDR5 6400 CL52 1.10V

The single specification that decides fitment is the 16GB 1Rx8 Registered ECC module at DDR5 6400 CL52 1.10V. If your board requires a different rank, voltage or speed grade this module will not be recognised or will not run at its rated performance. Buyers needing higher per-slot density or a different DDR generation should verify their motherboard manual before purchase.

商品特色

  • Exact-match DDR5-6400 CL52 1Rx8 ECC RDIMM runs at rated speed
  • 288-pin registered form factor fits Supermicro H13SSL-NT motherboard
  • Registered architecture offloads controller for full-slot stability
  • ECC corrects single-bit errors preventing silent data corruption
  • Lifetime replacement warranty with US-based technical support

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

商品問答

What DDR5 speed and CAS latency does this RDIMM run at on the Supermicro H13SSL-NT?

It operates at DDR5 6400 (PC5-51200) with a CL52 latency, the exact timing the board's memory controller expects for full-speed recognition.

Which physical slot and form factor does this 16 GB module require?

A 288-pin DDR5 RDIMM slot; it is a registered DIMM, not a UDIMM or SODIMM, and matches the H13SSL-NT's keying and population rules.

How is the module installed and what step is often missed?

Power down, open the chassis, align the notch with the 288-pin RDIMM slot, press firmly until both latches click, then consult the motherboard manual for the approved DIMM population order before booting.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。