BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00279516BTC
現貨
NEMIX RAM
NEMIX RAM 192GB (2x96GB) DDR5 5600 CL46 1.1V ECC RDIMM Dell XE9680L memory upgrade
Adds 192 GB of DDR5 ECC registered memory in two 96 GB modules running at 5600 MT/s with CL46 latency and 1.1 V operation for Dell PowerEdge XE9680L servers
- Capacity192GB (2 x 96GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 192 GB total capacity with two 96 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- ECC registered design detects and corrects data errors
- Low 1.1 V operation reduces server power draw
- Validated for Dell PowerEdge XE9680L rack servers
Dell PowerEdge XE9680L upgrade kit
This NEMIX RAM kit provides 192 GB of DDR5 ECC registered memory in two 96 GB modules. It is built for the Dell PowerEdge XE9680L rack server and runs at 5600 MT/s with CL46 latency at 1.1 V. The 2Rx4 organisation and 288-pin RDIMM form factor match the platform's registered DIMM slots.
Suited for capacity-bound server workloads
The kit targets administrators who need to maximise memory density in a compatible XE9680L chassis for virtualisation, in-memory databases or large-scale analytics. Buyers who require a heat spreader, lower CAS latency, non-ECC unbuffered modules, or a different form factor such as UDIMM or LRDIMM should look at other products.
192 GB total across two slots
Each 96 GB module occupies a single RDIMM slot, leaving remaining slots free for further expansion within the server's maximum supported capacity. The registered design and on-die ECC maintain data integrity at the rated 5600 MT/s speed. Workloads exceeding the installed 192 GB will require additional kits or higher-density modules if the platform supports them.
商品特色
- 192 GB total capacity with two 96 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- ECC registered design detects and corrects data errors
- Low 1.1 V operation reduces server power draw
- Validated for Dell PowerEdge XE9680L rack servers
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB (2 x 96GB) DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
商品問答
What Dell server model must I already own for this 192GB DDR5 5600 kit to be compatible?
The kit is validated for the Dell PowerEdge XE9680L rack server.
Will the 2Rx4 registered ECC modules work in the same channels as existing RDIMMs of a different capacity?
Dell PowerEdge servers allow mixed RDIMM capacities per channel when the memory mode is configured for independent channel operation.
How can I verify the 1.1V 5600 MT/s speed and CL46 latency are active after installation?
Check the system BIOS or iDRAC memory inventory; it will report each 96GB module running at 5600 MT/s with CL46 timings.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
