我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 RDIMM modules in a kit

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 2Rx8 ECC RDIMM Supermicro H13SSF

SKU CH-RWRE-TG5VF

A 192 GB DDR5 kit of four 48 GB registered ECC RDIMMs running at 5600 MHz CL46 and 1.1 V, validated for the Supermicro H13SSF motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity from four 48 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • Registered ECC architecture with CL46 latency
  • 10 V operation matches server memory controller spec
  • 288-pin RDIMM form factor verified for Supermicro H13SSF

Server memory kit for Supermicro H13SSF

This NEMIX RAM kit delivers 192GB across four 48GB DDR5 RDIMM modules. It is built for administrators who need registered ECC memory that matches the H13SSF motherboard's exact requirements. The modules run at 5600 speed with CL46 latency at 1.1V. Buyers who need a different capacity, unbuffered DIMMs, or a non-ECC configuration should look elsewhere.

Registered ECC RDIMM with 2Rx8 organization

The single specification that determines fit is the registered ECC RDIMM format with 2Rx8 rank structure. The H13SSF memory controller expects this exact combination of buffering, error correction, and rank geometry. A UDIMM, SODIMM, or different rank configuration will not be recognized or will prevent the system from posting. The 288-pin DDR5 interface and 1.1V operating voltage are also mandatory for this platform.

Straightforward installation with population rules

Installation follows standard DIMM insertion into the 288-pin slots, but the H13SSF manual defines a specific population order that must be followed for all four modules to operate at 5600. The most common issue is populating slots in the wrong sequence, which causes the system to run at reduced speed or detect less than 192GB. No heat spreaders are present, so airflow clearance is not a concern. Consult the motherboard manual before installing.

商品特色

  • 192 GB total capacity from four 48 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • Registered ECC architecture with CL46 latency
  • 10 V operation matches server memory controller spec
  • 288-pin RDIMM form factor verified for Supermicro H13SSF

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

商品問答

Will the 5600 MT/s speed run at full rate when all four slots of the Supermicro H13SSF are populated?

The kit is spec-matched to the board's memory-population rules so the registered ECC RDIMMs are recognised at the full 5600 MT/s rating across all four slots.

Does the 288-pin RDIMM form factor match the Supermicro H13SSF's DDR5 slots, and is it different from UDIMM or SODIMM?

Yes, these are 288-pin DDR5 RDIMMs — the registered form factor the H13SSF requires — and they are not interchangeable with UDIMM or SODIMM modules.

What physical clearance do the modules need since they have no heat spreader?

Without a heat spreader the modules use the standard low-profile RDIMM height, so they fit in the H13SSF's DIMM slots even with close-pitch heatsinks or airflow ducts.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。