BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
NEMIX RAM
A 192GB kit of four 48GB DDR5 5600 ECC unbuffered UDIMMs at CL46 and 1.1V, built for the ASRock Rack W680D4U-2L2T/G5 motherboard
This 192GB kit contains four 48GB DDR5 5600 modules built for the ASRock Rack W680D4U-2L2T/G5 motherboard. It targets servers and workstations that require ECC protection and high capacity without registered DIMMs. The unbuffered design keeps latency low for supported platforms. Buyers get a matched quad-channel set validated for this specific board.
Each module uses 2Rx8 organisation with on-die ECC at 1.1V and CL46 timing. The error-correcting code detects and corrects single-bit errors in flight, which reduces silent data corruption in critical workloads. The dual-rank layout doubles bank groups per DIMM, helping the memory controller sustain throughput across all four slots. No heat spreader is fitted, so airflow across the bare PCB must be adequate.
The motherboard must expose four DDR5 288-pin UDIMM slots and officially support DDR5-5600 ECC unbuffered memory at 1.1V. Confirm the BIOS version enables 48GB single-rank density per slot and quad-channel operation at the rated speed. Systems limited to lower speeds, registered DIMMs or smaller maximum capacity per slot will not run this kit as specified.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 ECC Unbuffered UDIMM Memory |
| Part Number | ME44800-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 192GB (4 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT |
The kit uses standard JEDEC DDR5 ECC UDIMM modules without heatsinks, so no firmware updates are required and no aftermarket cooling is expected for normal server workloads.
The CL46 latency at 1.10 V is the primary timing constraint; sustained throughput will be bounded by the 5600 MT/s data rate and the dual-rank 2Rx8 organisation.
Each module operates at 1.10 V DDR5 standard voltage with no heat spreader, so total power draw stays within typical UDIMM limits and airflow from the chassis fans is sufficient.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?