我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1TB 16x64GB DDR5 6400 CL52 1.1V 2Rx4 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-C1Q8-3C3JG

A 1 TB DDR5 registered ECC kit of 16 × 64 GB modules running at 6400 MT/s CL52 and 1.1 V, validated for the Supermicro H14DST-F motherboard

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Full 1 TB capacity with 16 matched 64 GB DDR5 modules
  • DDR5-6400 CL52 at 1.1 V runs at rated speed on the Supermicro H14DST-F
  • Registered ECC RDIMM design keeps every slot stable when fully populated
  • 2Rx4 rank and 288-pin form factor match the board's exact memory requirements
  • Lifetime replacement warranty with US-based technical support included

Exact-match server upgrade

This NEMIX RAM kit delivers 1TB of DDR5 6400 memory in a 16 x 64GB configuration. Each module is a 288-pin Registered ECC RDIMM running at 1.1V with CL52 latency. It is built for the Supermicro H14DST-F motherboard and uses major OEM chips from Samsung, Micron or Hynix. The kit arrives new and ready for full-population deployment.

Registered ECC architecture for full slots

Registered buffering offloads the memory controller so every slot can run fully populated at rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. The 2Rx4 organisation and 1.1V operation match the board's electrical requirements exactly. No heat spreaders are fitted, so airflow clearance follows the chassis design.

Replaces partial or mixed-capacity kits

This kit replaces configurations that cannot reach 1TB or that mix ranks, voltages or timings. The jump is worth it when the workload demands maximum registered ECC capacity at the motherboard's native DDR5 6400 speed. Buyers who need a different form factor, non-ECC modules or a smaller total capacity should select a kit matched to those requirements.

商品特色

  • Full 1 TB capacity with 16 matched 64 GB DDR5 modules
  • DDR5-6400 CL52 at 1.1 V runs at rated speed on the Supermicro H14DST-F
  • Registered ECC RDIMM design keeps every slot stable when fully populated
  • 2Rx4 rank and 288-pin form factor match the board's exact memory requirements
  • Lifetime replacement warranty with US-based technical support included

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

Does the 1.10 V DDR5 voltage limit how many 64 GB modules the Supermicro H14DST-F can run at 6400 MT/s?

The kit is an exact-match upgrade: 16 × 64 GB DDR5-6400 Registered ECC at 1.10 V, CL52, 2Rx4, 288-pin, so the memory controller recognises full capacity at rated speed.

How much heat and power does a fully populated 1 TB kit generate during continuous server workloads?

Registered architecture offloads the memory controller, ECC corrects single-bit errors on the fly, and 1.10 V DDR5 keeps power draw low across all 16 modules in 24/7 operation.

What motherboard and DIMM population rules must already be in place for this 16-module kit to work?

You need a Supermicro H14DST-F motherboard with 288-pin RDIMM slots and must follow the board's manual for supported capacities and approved population order.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。