我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 1TB (8x128GB) DDR5 4800 CL40 1.1V 4Rx4 ECC RDIMM HPE memory upgrade

SKU CH-CM3T-SYEYX

Eight 128 GB DDR5 registered ECC modules running at 4800 MT/s with CL40 latency and 1.1 V for HPE Z8 G5 workstations

  • Capacity1TB (8 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 1TB capacity with eight 128GB modules for large workloads
  • DDR5 4800 speed rated at PC5-38400 for high throughput
  • ECC registered RDIMM with 4Rx4 rank for server reliability
  • 1V operating voltage for efficient power use
  • Validated for HPE Z8 G5 and Z8 Fury G5 workstations

1 TB DDR5 ECC RDIMM kit for HPE workstations

This 1 TB kit contains eight 128 GB registered DIMMs built for HPE Z8 G5 and Z8 Fury G5 platforms. ECC and register buffering protect data integrity in mission-critical workloads. The modules run at DDR5 4800 with a CL40 latency at 1.10 V. IT teams specifying high-capacity server memory for certified HPE systems will find the configuration validated for those platforms.

Sustained throughput with registered buffering

Registered signalling reduces electrical load on the memory controller, allowing all eight ranks per module to maintain stability under continuous multi-threaded demand. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute jobs. The 4800 MT/s data rate delivers consistent bandwidth for virtualization, rendering and database services without the throttling seen in unbuffered configurations under load.

Low-voltage operation without heat spreaders

Each DIMM operates at 1.10 V, limiting power draw and thermal output inside dense chassis. The absence of heat spreaders keeps the 288-pin modules compatible with tight slot spacing in the target workstations. Passive airflow from system fans is sufficient for normal operation, keeping acoustic levels low in rack or desk-side deployments.

商品特色

  • 1TB capacity with eight 128GB modules for large workloads
  • DDR5 4800 speed rated at PC5-38400 for high throughput
  • ECC registered RDIMM with 4Rx4 rank for server reliability
  • 1V operating voltage for efficient power use
  • Validated for HPE Z8 G5 and Z8 Fury G5 workstations

商品規格

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K8
Capacity1TB (8 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHPE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content1TB (8X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

商品問答

How much power does the 1.10V DDR5 4800 kit draw when the workstation runs continuously?

Each 128 GB module operates at 1.10 V, so the eight-module kit draws proportionally more power than smaller kits; actual wattage depends on the platform's memory controller and workload.

What motherboard slots and CPU memory-controller support are required for these 288-pin 4Rx4 ECC RDIMMs?

The modules need a DDR5 RDIMM-capable motherboard with 288-pin slots and a CPU that supports 4Rx4 registered ECC memory at 4800 MT/s.

Can the CL40 4Rx4 modules share channels with older DDR5 RDIMMs of different rank or latency?

Mixing 4Rx4 CL40 modules with different-rank or different-latency DDR5 RDIMMs is not supported; all slots in a channel should use identical modules for stability.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。