NEMIX RAM 192GB 4x48GB DDR5 6400MHz PC5-51200 CL52 2Rx8 1.1V ECC Registered RDIMM memory upgrade
- 192GB (4 x 48GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM
A 256 GB DDR5 6400 registered ECC kit built to the exact rank, voltage and timing Supermicro H13SRA boards require for full-capacity operation
Size 256GB 2X128GB
This NEMIX RAM kit delivers 256 GB of DDR5 registered ECC memory in a matched pair of 128 GB RDIMMs. It is built for the Supermicro H13SRA-F and H13SRA-TF motherboards that require 288-pin DDR5 modules. The exact rank, voltage and timing match the board's memory controller expectations for full-capacity recognition.
Registered architecture buffers the address and command signals so the memory controller remains stable when every slot is populated at the rated 6400 MT/s speed. ECC circuitry detects and corrects single-bit errors on the fly, preventing silent data corruption during long-running compute or database tasks. The 1.1 V operating voltage supports consistent operation without thermal throttling under continuous load.
The DDR5 6400 PC5-51200 interface provides the bandwidth ceiling for this kit; actual throughput depends on the motherboard's memory controller and population rules. Only systems that support 2Rx4 registered DIMMs at this voltage and latency can utilise the full 256 GB capacity. Builders must verify the manual for approved DIMM population order and maximum supported density per channel before installation.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Yes, the kit runs at 1.10V, which is the standard DDR5 voltage for registered ECC modules and keeps power consumption and thermal output in check during continuous operation.
This 256GB kit is validated for the Supermicro H13SRA-F and H13SRA-TF boards that accept 288-pin DDR5 RDIMMs; other platforms are not guaranteed to recognise the 2Rx4 registered ECC configuration.
Mixing different capacities or ranks is possible only if the motherboard manual approves the specific population order; the kit itself is a matched 2x128GB pair designed to run together at DDR5-6400 CL52.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?