我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 RDIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 6400MHz ECC RDIMM memory upgrade

SKU CH-1AD4-EDEDQ

A 256 GB registered DDR5 server memory kit with ECC, CL52 latency and 1.1 V operation, validated for Supermicro X14SBM-TF systems

  • Capacity256GB (2 x 128GB)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Compatible SystemSupermicro
  • 256 GB total capacity for large server workloads
  • DDR5 6400 MHz speed with PC5-51200 bandwidth
  • ECC registered design protects data integrity
  • 1 V low-voltage operation reduces power draw
  • 288-pin RDIMM form factor fits Supermicro X14SBM-TF

256GB DDR5 ECC RDIMM kit for Supermicro servers

This 256GB kit contains two 128GB DDR5 6400MHz registered DIMMs built for Supermicro X14SBM-TF platforms. The modules deliver ECC error correction and 4Rx4 organisation for dense memory configurations. System integrators and IT teams use it to expand capacity in workloads that demand data integrity and registered signalling.

Registered DDR5 at 1.1V with CL52 latency

Each module operates at 1.10V with a CAS latency of 52 cycles under the PC5-51200 standard. The registered buffer reduces electrical load on the memory controller while ECC corrects single-bit errors in flight. No heat spreader is fitted, so airflow across the 288-pin PCB manages thermals in typical server chassis.

Replaces smaller RDIMM pairs when capacity limits

Upgrading from lower-density registered kits removes the bottleneck that forces swapping or limits virtual-machine density. The jump is worth it when the platform supports 128GB per slot and the workload benefits from 256GB of ECC-protected address space without adding modules.

商品特色

  • 256 GB total capacity for large server workloads
  • DDR5 6400 MHz speed with PC5-51200 bandwidth
  • ECC registered design protects data integrity
  • 1 V low-voltage operation reduces power draw
  • 288-pin RDIMM form factor fits Supermicro X14SBM-TF

商品規格

BrandNEMIX RAM
SeriesSupermicro Compatible Series Server Memory
ModelDDR5 ECC RDIMM Registered Server RAM
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL52
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB (2 x 128GB) DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

How do I install these 288-pin DDR5 RDIMMs in a Supermicro X14SBM-TF, and what step is commonly missed?

Power off the server, open the chassis, align each 288-pin module with the DDR5 slot key, press firmly until both retention clips click, then verify in BIOS that both 128GB modules are detected at 6400MHz; the step often missed is fully seating both clips so the registered buffer initialises correctly.

What maintenance or replacement will this 256GB ECC RDIMM kit need over its service life?

No scheduled maintenance is required; the modules have no heat spreader and run at 1.1V, so only occasional dust removal from the DIMM slots is needed, and ECC correction handles single-bit errors transparently until a module fails, at which point the faulty 128GB stick is replaced under lifetime warranty.

What limit appears first when this 4Rx4 DDR5-6400 kit runs sustained workloads on the X14SBM-TF?

The CAS latency of CL52 at 6400MHz sets the timing ceiling; under continuous load the memory controller hits this latency bound before thermal or voltage limits, because the registered design and 1.10V operation keep power draw and temperature within spec.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。