BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278445BTC
現貨
NEMIX RAM
NEMIX RAM 256GB (8x32GB) DDR5 4800 CL40 1.1V ECC RDIMM for Cisco UCS X210c M7 memory upgrade
256 GB kit of eight 32 GB DDR5 modules at 4800 MHz with CL40 latency, 1.1 V ECC registered DIMMs for Cisco UCS X210c M7 servers
- Capacity256GB (8 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB total capacity across eight 32 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- CL40 latency at 1.10 V operating voltage
- ECC registered RDIMM for data integrity and signal stability
- Designed for Cisco UCS X210c M7 compute node compatibility
256GB DDR5 4800 kit for Cisco UCS X210c M7
This 256GB kit contains eight 32GB DDR5 4800 ECC registered DIMMs built for the Cisco UCS X210c M7 compute node. Each module runs at 1.10V with CL40 latency and uses a 1Rx4 organisation on 288-pin RDIMM form factor. It targets IT teams expanding memory capacity in that specific server platform.
Thermals and power at DDR5 4800
The modules operate at the standard DDR5 4800 data rate and 1.10V without a heat spreader, relying on the server's directed airflow for cooling. Registered buffering and on-die ECC add minimal latency overhead while maintaining signal integrity across all eight slots under sustained load. Power draw scales linearly with the 256GB total capacity at the rated voltage.
What the kit contents change
The package delivers a matched set of eight 32GB DIMMs pre-validated for the Cisco UCS X210c M7, eliminating the need to source individual modules or verify rank compatibility. Major OEM Samsung, Micron or Hynix DRAM ensures consistent quality across the kit. No additional software, cables or cooling accessories are included beyond the memory modules themselves.
商品特色
- 256 GB total capacity across eight 32 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- CL40 latency at 1.10 V operating voltage
- ECC registered RDIMM for data integrity and signal stability
- Designed for Cisco UCS X210c M7 compute node compatibility
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | Cisco Server Compatible Series Memory |
| Model | Cisco DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-314K8 |
| Capacity | 256GB (8 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Cisco |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (8X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
商品問答
How do I install the 8x32GB DDR5 RDIMMs in the Cisco UCS X210c M7 and what step is often missed?
Power down the node, open the chassis, align each 288-pin module with its slot, press firmly until both latches click, then verify in BIOS that all 256GB are recognised at 4800 MT/s; the step often missed is seating every module until both latches engage.
What maintenance or replacement will the 1Rx4 ECC RDIMM kit need over time?
The modules have no moving parts or heat spreaders, so routine maintenance is limited to keeping the server air filters clean; replacement is only required if a module fails, which is covered by the manufacturer's lifetime replacement warranty.
What limit appears first when the 256GB kit runs sustained workloads at CL40 1.1V?
The registered DDR5 4800 interface caps throughput at PC5-38400, so memory bandwidth saturates before the 1.1V power envelope or thermal limits become a bottleneck.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
