我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 SODIMM Kit POSIFLEX ZT-3116E

SKU CH-BFWQ-PWQ2N

A 32 GB DDR4 SODIMM kit for POSIFLEX ZT-3116E terminals, running at 3200 MT/s with CL22 latency and 1.2 V power draw

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB dual-channel kit boosts multitasking headroom for POS terminals
  • DDR4 3200 speed with CL22 latency delivers responsive transaction processing
  • 20V low-voltage operation reduces power draw in always-on kiosks
  • 260-pin SODIMM form factor fits POSIFLEX ZT-3116E slots directly
  • Major OEM chips from Samsung, Micron or Hynix ensure enterprise-grade reliability

POSIFLEX ZT-3116E Memory Upgrade Kit

This 32 GB DDR4 SODIMM kit is built for the POSIFLEX ZT-3116E Haydn ZT Series point-of-sale terminal. It contains two 16 GB unbuffered non-ECC modules that install in minutes to expand system memory.

Replacing Slower or Smaller Factory Modules

The kit runs at 3200 MHz with CL22 latency and 1.20 V, matching the PC4-25600 specification. Swapping out lower-capacity or lower-speed sticks is worthwhile when the terminal runs multiple retail applications simultaneously and the original memory limits multitasking.

Dual-Rank 2Rx8 Layout for Dense Capacity

Each 260-pin module uses a 2Rx8 organisation with major OEM chips from Samsung, Micron or Hynix. The dual-rank design delivers 32 GB in two slots, leaving any additional SODIMM sockets free for future expansion while drawing standard DDR4 power.

商品特色

  • 32GB dual-channel kit boosts multitasking headroom for POS terminals
  • DDR4 3200 speed with CL22 latency delivers responsive transaction processing
  • 20V low-voltage operation reduces power draw in always-on kiosks
  • 260-pin SODIMM form factor fits POSIFLEX ZT-3116E slots directly
  • Major OEM chips from Samsung, Micron or Hynix ensure enterprise-grade reliability

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

商品問答

Will the 260-pin SODIMM modules fit the POSIFLEX ZT-3116E memory slots?

Yes, the kit uses 260-pin DDR4 SODIMM modules which match the slot type used by the POSIFLEX ZT-3116E Haydn ZT Series terminal.

Is any configuration needed in BIOS after installing the 32GB DDR4 3200 CL22 kit?

The modules are Non-ECC Unbuffered and run at 1.2V; most POS terminals detect the 3200 speed automatically, but check the owner's manual to confirm the system trains at PC4-25600.

How long will the Samsung, Micron or Hynix chips in this 2Rx8 kit last under continuous POS workloads?

The modules are stress-tested under load and covered by a lifetime replacement warranty, so the DRAM chips are rated for the full service life of the terminal.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。