我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green SODIMM modules side by side, 260-pin DDR4, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 SODIMM POSIFLEX RT-6016-G2 memory upgrade

SKU CH-77DX-AE8Q4

32 GB kit of two 16 GB DDR4 3200 CL22 SODIMM modules for POSIFLEX RT-6016-G2 terminals

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit (2 × 16 GB) expands POS terminal memory
  • DDR4 3200 PC4-25600 speed supports demanding workloads
  • CL22 latency at 1.20 V balances responsiveness and efficiency
  • 260-pin SODIMM form factor fits POSIFLEX RT-6016-G2 exactly
  • Non-ECC unbuffered 2Rx8 modules tested for stable operation

POSIFLEX RT-6016-G2 memory kit

This 32 GB kit supplies two 16 GB DDR4 SODIMM modules built for the POSIFLEX RT-6016-G2 terminal. It targets IT teams and system integrators who need validated, non-ECC memory for point-of-sale or kiosk deployments.

Upgrading from lower capacity or slower DDR4 SODIMMs

Replacing 8 GB or 16 GB modules with this 32 GB kit doubles usable memory and moves the terminal to DDR4 3200 speed, which is worthwhile when multitasking POS software, local databases or multiple browser tabs. Systems already running 32 GB at 3200 CL22 will see no benefit.

Straightforward SODIMM swap

Installation follows the usual SODIMM procedure: power down, open the access panel, align the 260-pin modules and press until the latches click. The 1.2 V modules are unbuffered and non-ECC, so they must match the terminal's slot specification; mixing with ECC or registered DIMMs will prevent boot.

商品特色

  • 32 GB kit (2 × 16 GB) expands POS terminal memory
  • DDR4 3200 PC4-25600 speed supports demanding workloads
  • CL22 latency at 1.20 V balances responsiveness and efficiency
  • 260-pin SODIMM form factor fits POSIFLEX RT-6016-G2 exactly
  • Non-ECC unbuffered 2Rx8 modules tested for stable operation

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

商品問答

Will the 260-pin SODIMM modules fit the POSIFLEX RT-6016-G2 terminal?

Yes, the 260-pin DDR4 SODIMM form factor matches the memory slots in the POSIFLEX RT-6016-G2 terminal.

Do I need to configure anything in the BIOS after installing the 3200 CL22 kit?

The modules run at 1.20 V with standard JEDEC timings, so the system should detect the 32 GB kit automatically without manual BIOS changes.

Are the Samsung, Micron or Hynix chips on these modules replaceable if one fails?

The memory chips are soldered to the PCB and not user-replaceable; a defective module would be swapped as a complete unit under the lifetime replacement warranty.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。