BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00275801BTC
現貨
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14DST-FL
32 GB dual-rank DDR5 6400 CL52 ECC RDIMM kit built for the Supermicro H14DST-FL motherboard
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact DDR5-6400 CL52 1.1V spec matches Supermicro H14DST-FL for full-speed recognition
- 288-pin Registered ECC RDIMM form factor fits board slots and population rules
- Registered buffer offloads controller for stable full-capacity operation across all slots
- On-die ECC corrects single-bit errors preventing silent data corruption and reboots
- Samsung Micron Hynix chips deliver enterprise-grade reliability for server workloads
Exact DDR5-6400 kit for Supermicro H14DST-FL
This 32 GB kit contains two 16 GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.1 V operation. It is built as an exact-match upgrade for the Supermicro H14DST-FL motherboard, delivering registered ECC memory that the platform recognises at full capacity and rated speed.
Registered DDR5 requires board support for RDIMMs
The modules use the 288-pin registered DIMM form factor and will not work in systems that accept only unbuffered UDIMMs or SODIMMs. Population rules and maximum supported capacity are defined by the motherboard, so the manual must be consulted before installation to confirm slot order and total memory limits.
Enterprise-grade stability without a heat spreader
Samsung, Micron or Hynix DRAM chips provide the registered buffer that offloads the memory controller, allowing every slot to run fully populated while ECC corrects single-bit errors on the fly. The bare-module design fits dense server chassis where tall heat spreaders would interfere with airflow or adjacent components.
商品特色
- Exact DDR5-6400 CL52 1.1V spec matches Supermicro H14DST-FL for full-speed recognition
- 288-pin Registered ECC RDIMM form factor fits board slots and population rules
- Registered buffer offloads controller for stable full-capacity operation across all slots
- On-die ECC corrects single-bit errors preventing silent data corruption and reboots
- Samsung Micron Hynix chips deliver enterprise-grade reliability for server workloads
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
商品問答
Should I choose the 2x16GB kit or a single 32GB module for my H14DST-FL?
The kit provides two 16GB RDIMMs that populate two channels, letting the memory controller run both ranks in parallel for full bandwidth.
What does DDR5-6400 actually deliver once installed in the Supermicro board?
The modules operate at 6400 MT/s with CL52 timing at 1.1V, giving the rated PC5-51200 throughput when the motherboard trains them at that speed.
How does the 288-pin RDIMM interface limit what I can install?
The board only accepts registered 288-pin DDR5 RDIMMs; UDIMMs or SODIMMs will not fit and unbuffered modules are not supported.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
