我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR4 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2933MHz CL21 1.2V UDIMM memory upgrade

SKU CH-T4AY-M1ZHW

A 32 GB DDR4 kit with four 8 GB UDIMM modules running at 2933 MHz CL21 for Supermicro systems

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB total capacity across four 8 GB modules
  • DDR4 2933 MHz speed rated at PC4-23400
  • CL21 CAS latency for responsive operation
  • 2 V low-voltage design reduces power draw
  • 288-pin UDIMM form factor fits SuperMicro boards

32GB DDR4 Kit for Supermicro Workstations

This 32GB kit contains four 8GB DDR4 UDIMM modules rated at 2933MHz with CL21 latency. It is built for Supermicro desktop and SuperWorkstation motherboards such as the MBD-C9X299-PGF. The non-ECC unbuffered design suits systems that do not require error correction.

Standard 1.2V Operation Without Heat Spreaders

The modules run at the standard 1.20V DDR4 voltage and use a 1Rx8 organisation with major OEM chips. No heat spreaders are fitted, so the kit relies on case airflow for cooling. Power draw and noise remain at typical DDR4 levels for this voltage and density.

Plug-In Upgrade With Lifetime Replacement

The package delivers the four matched modules ready for installation in the 288-pin slots. No additional software, cables or brackets are included. The supplier backs the kit with a lifetime replacement warranty and US-based technical support.

商品特色

  • 32 GB total capacity across four 8 GB modules
  • DDR4 2933 MHz speed rated at PC4-23400
  • CL21 CAS latency for responsive operation
  • 2 V low-voltage design reduces power draw
  • 288-pin UDIMM form factor fits SuperMicro boards

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K4
Capacity32GB (4 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (4X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

商品問答

How do I install the four 8 GB DDR4 288-pin UDIMM modules in my Supermicro motherboard, and which step is often missed?

Power off, open the case, align each module notch with the slot key, press down until both retention clips click, then verify in BIOS that all 32 GB run at 2933 MHz CL21; the step often missed is seating every module fully so both clips engage.

What maintenance or replacement will this 32 GB DDR4 2933 MHz CL21 1.20 V kit need over time?

No scheduled maintenance is required; keep slots dust-free and ensure airflow. If a module fails, the lifetime replacement warranty covers it — swap the faulty stick for a new one.

What limit appears first when this DDR4 2933 MHz CL21 1Rx8 kit runs sustained heavy workloads?

The CL21 latency at 2933 MHz and 1.20 V sets the throughput ceiling; sustained loads hit that timing boundary before voltage or thermal limits become a factor.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。