我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 RDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM 384GB 4x96GB DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM memory upgrade

SKU CH-A7M2-A5DSC

384 GB DDR5-5600 registered ECC kit in four 96 GB modules, CL46 at 1.1 V, 288-pin RDIMM, validated for Supermicro X14SDV-36C-SP3F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

  • 384 GB total capacity across four 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro X14SDV-36C-SP3F
  • 1 V operation at 2Rx4 registered ECC reduces controller load and corrects single-bit errors
  • 288-pin RDIMM form factor matches the board's required slot type and population rules
  • Lifetime replacement coverage with free US-based technical support included

Exact-Match Server Upgrade

This 384GB kit delivers four 96GB DDR5 RDIMMs tuned to 5600 MT/s with CL46 timing and 1.1V operation. Registered ECC architecture meets the precise rank, voltage and timing requirements of the Supermicro X14SDV-36C-SP3F motherboard so the memory controller recognises full capacity at rated speed.

Enterprise Stability Under Load

Registered buffering offloads the memory controller, allowing every slot to run fully populated at full capacity while ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. The 1.1V operating voltage keeps power draw consistent with platform expectations for dense 2Rx4 modules.

Build Integration Checklist

The 288-pin RDIMM form factor matches the board's physical and electrical requirements — not UDIMM or SODIMM — and follows the manufacturer's population rules for the X14SDV-36C-SP3F. Verify supported capacities, approved DIMM order and installation steps in your system manual before purchase to ensure compatibility.

商品特色

  • 384 GB total capacity across four 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro X14SDV-36C-SP3F
  • 1 V operation at 2Rx4 registered ECC reduces controller load and corrects single-bit errors
  • 288-pin RDIMM form factor matches the board's required slot type and population rules
  • Lifetime replacement coverage with free US-based technical support included

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the four 96GB DDR5 RDIMMs in the Supermicro X14SDV-36C-SP3F and which slot order is the step people get wrong?

Populate the four 288-pin RDIMMs in the exact sequence shown in the Supermicro X14SDV-36C-SP3F manual; the board requires a specific DIMM-population order for 384GB to be recognised at DDR5-5600 CL46.

What maintenance or replacement will this 384GB DDR5 ECC RDIMM kit need later?

No routine maintenance is required; ECC corrects single-bit errors on the fly, and if a module ever fails the lifetime replacement warranty covers a direct swap of the faulty 96GB stick.

What limit appears first when the 4x96GB DDR5-5600 CL46 kit runs sustained workloads?

The registered buffer and 1.1V operation keep every slot stable at full 384GB capacity, so the first ceiling is the motherboard's maximum supported memory rather than a thermal or voltage throttle.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。