BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00279516BTC
現貨
NEMIX RAM
NEMIX RAM 384GB (6×64GB) DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H13SST-G memory upgrade
384 GB kit of six 64 GB DDR5 RDIMMs running at 6400 MT/s with CL52 latency, 1.1 V registered ECC, validated for the Supermicro H13SST-G motherboard
- Capacity384GB (6 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from six 64 GB modules for dense server workloads
- DDR5 6400 (PC5-51200) speed matching the board's rated frequency
- CL52 latency and 1.10 V operation tuned to the memory controller
- Registered ECC RDIMM with 2Rx4 organisation offloads the controller and corrects single-bit errors
- 288-pin form factor verified for Supermicro H13SST-G motherboard compatibility
Exact-match DDR5 upgrade kit
This 384GB kit contains six 64GB DDR5 6400 CL52 registered ECC RDIMMs built to the voltage and rank layout the Supermicro H13SST-G memory controller expects. Each module runs at 1.1V with 2Rx4 organization so the board recognizes the full capacity at rated speed. The 288-pin form factor matches the slots on that motherboard.
Replaces partial or slower memory sets
Install this kit when the server currently runs fewer than six DIMMs or operates at a lower data rate than PC5-51200. The registered architecture lets every slot stay populated at full capacity without overloading the memory controller. ECC corrects single-bit errors on the fly to prevent silent data corruption. Skip this kit if the platform cannot accept 2Rx4 registered modules or if the manual limits total capacity below 384GB.
Fits Supermicro H13SST-G memory rules
The modules slot directly into the board’s 288-pin RDIMM sockets following the population order in the system manual. No heat spreaders are fitted so clearance stays minimal inside dense chassis. Registered buffering frees the memory controller for other tasks while ECC protects production workloads. Verify the approved DIMM sequence and maximum supported capacity before installation.
商品特色
- 384 GB total capacity from six 64 GB modules for dense server workloads
- DDR5 6400 (PC5-51200) speed matching the board's rated frequency
- CL52 latency and 1.10 V operation tuned to the memory controller
- Registered ECC RDIMM with 2Rx4 organisation offloads the controller and corrects single-bit errors
- 288-pin form factor verified for Supermicro H13SST-G motherboard compatibility
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K6 |
| Capacity | 384GB (6 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 6X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
商品問答
Will the 288-pin RDIMM modules fit the Supermicro H13SST-G DIMM slots?
Yes, the kit uses the exact 288-pin Registered RDIMM form factor required by the H13SST-G motherboard; it is not a UDIMM or SODIMM and matches the board's physical slot keying.
What population order should I follow when installing the six 64 GB modules on the H13SST-G?
Consult the motherboard manual for the approved DIMM population sequence; the board's memory-controller rules dictate which slots must be filled first to reach the full 384 GB capacity at DDR5-6400.
Do these modules need active cooling or periodic cleaning because they lack a heat spreader?
The DIMMs ship without a heat spreader and rely on the server's chassis airflow; ensure case fans maintain adequate flow over the modules and dust them during routine system maintenance.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
