我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 384GB 8x48GB DDR5 4800 CL40 2Rx8 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-2D0D-NJTXF

Eight 48 GB DDR5 registered ECC modules totalling 384 GB at 4800 MT/s CL40 1.1 V for Supermicro H14DSG-OM

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity from eight 48 GB modules
  • DDR5-4800 speed with CL40 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors automatically
  • 1 V operation matches the motherboard's memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM slots

Exact-match server memory kit

This NEMIX RAM kit delivers 384GB across eight 48GB DDR5 4800 RDIMM modules built to the Supermicro H14DSG-OM motherboard specification. Registered ECC architecture with 2Rx8 organisation and CL40 timing at 1.1V lets the memory controller address full capacity at rated speed. Modules use major OEM Samsung, Micron or Hynix chips and ship without heat spreaders.

Verify motherboard population rules

Before ordering, consult the Supermicro H14DSG-OM manual for supported capacities, approved DIMM population order and any BIOS revision requirements. The board requires 288-pin Registered RDIMMs — not UDIMMs or SODIMMs — and population rules can limit usable slots when all eight are installed. Confirm the firmware version listed in the manual matches your system to avoid recognition issues.

Suited for fully populated H14DSG-OM builds

This kit suits administrators expanding a Supermicro H14DSG-OM to its maximum validated capacity with matched modules that eliminate mixed-rank uncertainty. Buyers needing fewer than eight modules, non-ECC unbuffered memory, or a different DDR generation should select a kit that matches their specific slot count and motherboard requirements.

商品特色

  • 384 GB total capacity from eight 48 GB modules
  • DDR5-4800 speed with CL40 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors automatically
  • 1 V operation matches the motherboard's memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM slots

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the kit include all eight 48 GB modules or must I buy any separately?

The package contains the full 384 GB kit — eight 48 GB DDR5 4800 CL40 2Rx8 1.10 V registered ECC RDIMMs — so no additional modules are needed.

Why choose the 8 × 48 GB configuration instead of a smaller kit?

It populates every slot on the Supermicro H14DSG-OM with 384 GB total capacity, letting the board run all channels fully populated at DDR5 4800 with registered ECC stability.

What does the CL40 rating mean when the memory is installed in the server?

CL40 is the CAS latency at DDR5 4800; the registered ECC modules operate at 1.10 V and deliver the rated timing across all eight slots for consistent throughput.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。