我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green bare circuit board DDR5 memory module 48GB 288-pin UDIMM no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 5600 CL46 2Rx8 1.1V 288-Pin UDIMM SuperMicro C9Z790-CG memory upgrade

SKU CH-N1WF-V17BV

A 48 GB DDR5 UDIMM running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the SuperMicro C9Z790-CG platform

  • Capacity48GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 48GB

  • 48 GB capacity expands workstation multitasking headroom
  • DDR5 5600 speed accelerates data-intensive workloads
  • CL46 latency balances responsiveness with stability
  • 10 V operation reduces power draw under load
  • Validated for SuperMicro C9Z790-CG motherboard compatibility

48 GB DDR5 upgrade for SuperMicro C9Z790-CG

This single 48 GB module targets owners of the SuperMicro C9Z790-CG desktop workstation who need more memory capacity. It is a non-ECC unbuffered UDIMM built with Samsung, Micron or Hynix chips and tested for that specific motherboard. Buyers who need ECC protection or registered modules cannot use this part.

DDR5 5600 speed ceiling and UDIMM form factor

The DDR5 5600 (PC5-44800) standard sets the maximum data rate this module can deliver; the system will not run it faster without overclocking. As an unbuffered 288-pin UDIMM it fits only consumer-style desktop slots, not registered or load-reduced server sockets. Builders who need higher frequencies or server-grade buffering must choose a different specification.

CL46 latency at 1.1 V decides fit

The rated CAS latency of CL46 at 1.1 V is the key timing figure that determines whether this module matches the board’s XMP or JEDEC profile. If the platform requires tighter timings or a different voltage, stability may suffer. Buyers who need lower latency or a different voltage should verify the motherboard’s qualified-vendor list before purchasing.

商品特色

  • 48 GB capacity expands workstation multitasking headroom
  • DDR5 5600 speed accelerates data-intensive workloads
  • CL46 latency balances responsiveness with stability
  • 10 V operation reduces power draw under load
  • Validated for SuperMicro C9Z790-CG motherboard compatibility

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-4828K1
Capacity48GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content48GB (1X48GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Should I pick the 48GB 5600MHz CL46 module or look for a different capacity for my SuperMicro C9Z790-CG?

This single 48GB 2Rx8 DDR5 UDIMM runs at 5600MHz with CL46 timings at 1.10V and matches the SuperMicro C9Z790-CG memory list exactly.

What does the 5600MHz speed actually deliver once the module is installed in the board?

The module operates at the JEDEC DDR5-5600 standard rate (PC5-44800) with CL46 latency, giving the bandwidth and timing the motherboard expects without manual tuning.

The 288-pin DDR5 UDIMM interface — what does it cap in practice on this platform?

The 288-pin DDR5 UDIMM interface on the C9Z790-CG is limited to the DDR5-5600 JEDEC speed class, so this CL46 1.10V module runs at the platform's native maximum without overclocking.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。