我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with gold edge contacts and black memory chips on both sides

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX EK-1630 memory upgrade

SKU CH-WB38-D3W6R

A 4 GB DDR3 SODIMM rated at 1333 MHz with CL9 latency for POSIFLEX EK-1630 kiosks

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4GB capacity extends POSIFLEX EK-1630 kiosk multitasking headroom
  • DDR3 1333 PC3-10600 speed matches system bus for stable throughput
  • Low 1.35V operation reduces power draw in always-on deployments
  • 204-pin SODIMM form factor fits Mercury Series kiosk memory slots directly
  • Major-brand Samsung, Micron or Hynix chips ensure enterprise-grade reliability

POSIFLEX EK-1630 compatible upgrade

This 4GB DDR3 SODIMM is built specifically for the POSIFLEX EK-1630 Mercury Series kiosk. It targets technicians and integrators who need a direct, validated replacement for point-of-sale terminals. The module follows the exact 204-pin layout and timing required by the platform.

4GB capacity with DDR3 1333 speed

The stick provides 4GB of memory running at 1333 MT/s with a CAS latency of CL9. That headroom covers typical POS workloads such as transaction processing, inventory lookup and peripheral management. It will not satisfy systems that demand higher density or faster throughput than the PC3-10600 specification allows.

Unbuffered non-ECC build with major OEM chips

The module uses unbuffered, non-ECC architecture populated with Samsung, Micron or Hynix components. No heat spreader is fitted, keeping the profile low for tight kiosk chassis. The 204-pin SODIMM edge connector enables a straightforward slot-in installation without tools or cables.

商品特色

  • 4GB capacity extends POSIFLEX EK-1630 kiosk multitasking headroom
  • DDR3 1333 PC3-10600 speed matches system bus for stable throughput
  • Low 1.35V operation reduces power draw in always-on deployments
  • 204-pin SODIMM form factor fits Mercury Series kiosk memory slots directly
  • Major-brand Samsung, Micron or Hynix chips ensure enterprise-grade reliability

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

商品問答

Will this 204-pin DDR3 1333 SODIMM run at 1.35 V alongside the original 1.50 V modules in my POSIFLEX EK-1630?

The module is rated for 1.50 V operation; the 1.35 V figure in the title reflects a low-voltage variant, so it will run at the standard DDR3 voltage already used by the kiosk.

How can I confirm the 4 GB 2Rx8 stick is recognised at PC3-10600 speed after installation?

Enter the BIOS or use a system-information tool and verify the memory shows 1333 MHz, CL9 timing and the full 4 GB capacity.

Does the MS10600-428K1 package include only the SODIMM or any extra brackets or tools?

The box contains the single 4 GB 204-pin SODIMM; no brackets, screws or tools are supplied.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。