我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips, 204-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz PC3-10600 1.35V 204-Pin SODIMM memory upgrade for POSIFLEX XT-4015

SKU CH-P62C-MJN4M

A 4 GB DDR3 SODIMM running at 1333 MHz with 1.35 V low-voltage operation for the POSIFLEX XT-4015 terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4 GB capacity expands POS terminal memory
  • DDR3 1333 MHz speed matches system requirements
  • 35 V low-voltage design reduces power draw
  • 204-pin SODIMM form factor fits XT-4015 slot
  • CL9 latency supports responsive transaction processing

4GB DDR3 SODIMM for POSIFLEX XT-4015

This 4GB DDR3 1333MHz SODIMM module is built specifically for the POSIFLEX XT-4015 point-of-sale terminal. It uses a 204-pin unbuffered non-ECC design with 2Rx8 organisation. The part number MS10600-428K1 identifies the exact configuration validated for that platform.

Low-voltage operation at 1.35V

The module runs at 1.35V, below the standard 1.50V DDR3 level, reducing power draw and heat inside the compact POS chassis. No heat spreader is fitted, relying on the terminal's internal airflow. CL9 latency at 1333MHz delivers responsive operation for typical retail workloads.

Replaces factory memory in the XT-4015

This upgrade suits owners of the POSIFLEX XT-4015 who need more capacity than the original module provides. It is not for systems requiring ECC, registered DIMMs, or a different pin count. The jump is worth it when the terminal slows under multi-tasking or newer POS software.

商品特色

  • 4 GB capacity expands POS terminal memory
  • DDR3 1333 MHz speed matches system requirements
  • 35 V low-voltage design reduces power draw
  • 204-pin SODIMM form factor fits XT-4015 slot
  • CL9 latency supports responsive transaction processing

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

商品問答

How do I install the 204-pin SODIMM in the POSIFLEX XT-4015 and what step is often missed?

Power off the terminal, open the memory cover, align the notch on the module with the slot key, press firmly until both side clips click, then verify 4GB appears in BIOS before closing the case.

Will the Samsung, Micron or Hynix chips on this module need any replacement or maintenance over time?

The memory chips are solid-state with no moving parts and require no scheduled maintenance; they are rated for the lifetime of the terminal under normal operating conditions.

At 1.35 V and CL9 latency, what limit appears first during sustained POS workloads?

The 1333 MT/s data rate and single 4 GB capacity will bottleneck throughput before voltage or latency become factors in typical retail transaction loads.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。