BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00279328BTC
現貨
NEMIX RAM
NEMIX RAM 576GB 6x96GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H13SRH memory upgrade
A 576 GB DDR5 6400 CL52 registered ECC kit of six 96 GB modules at 1.1 V, 288-pin, validated for Supermicro H13SRH motherboards
- Capacity576GB (6 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576 GB total capacity from six 96 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- 1 V operation matches the memory controller specification
- Registered ECC design corrects single-bit errors and offloads the controller
- 288-pin RDIMM form factor verified for Supermicro H13SRH
Supermicro H13SRH memory kit
This 576GB kit delivers six 96GB DDR5 6400 RDIMMs built to the exact rank, voltage and timing the H13SRH memory controller expects. It targets administrators who must populate every slot with registered ECC modules that the board recognises at full capacity and rated speed.
Sustained enterprise stability
Registered architecture offloads the memory controller so all six slots run fully populated without signal degradation, while ECC corrects single-bit errors on the fly to prevent silent data corruption during continuous workloads. The 1.1V operating point keeps power draw predictable across long deployments.
2Rx4 rank configuration
The dual-rank 2Rx4 organisation is the single specification that determines whether this kit matches the motherboard's population rules and achieves the full 576GB capacity. Verify the manual's approved DIMM order before installation.
商品特色
- 576 GB total capacity from six 96 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- 1 V operation matches the memory controller specification
- Registered ECC design corrects single-bit errors and offloads the controller
- 288-pin RDIMM form factor verified for Supermicro H13SRH
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
商品問答
Will the 1.1 V DDR5 6400 RDIMMs run cool and quiet when all six slots are populated 24/7?
Each module operates at 1.1 V and uses a registered architecture that reduces electrical load on the memory controller, helping the server maintain stable thermals and low fan noise even at full 576 GB capacity.
What motherboard and DIMM slots must my system already provide for this kit to work?
The kit requires a Supermicro H13SRH motherboard with six DDR5 288-pin RDIMM slots and support for 2Rx4 registered ECC modules at 6400 MT/s.
Can I mix these 96 GB 2Rx4 RDIMMs with smaller or differently ranked DDR5 modules already installed in the H13SRH?
The H13SRH memory controller expects identical rank, voltage and timing per channel; mixing 2Rx4 1.1 V CL52 modules with other configurations may prevent full-speed operation or full-capacity recognition.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
