NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 4800 CL40 ECC RDIMM for Dell Precision 7960
64 GB DDR5 ECC RDIMM kit at 4800 MT/s CL40, registered 1.1 V 288-pin modules built for Dell Precision 7960 workstations
- Capacity64GB (2 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB dual-channel kit expands workstation memory
- ECC registered design protects data integrity in critical workloads
- DDR5 4800 MT/s delivers high bandwidth for demanding applications
- 10 V operation reduces power draw under load
- Validated for Dell Precision 7960 rack and tower systems
Dell Precision 7960 memory kit
This 64 GB kit contains two 32 GB DDR5 RDIMMs built for the Dell Precision 7960 rack or tower workstation. Registered ECC operation protects data integrity in professional workloads. The modules run at 1.1 V and carry CL40 latency.
Capacity and headroom
Sixty-four gigabytes across two slots leaves room for further expansion on boards with additional DIMM sockets. The dual-rank 2Rx8 organisation suits memory-intensive tasks such as virtualisation or large dataset processing. Systems limited to two slots reach their ceiling here.
Registered ECC RDIMM requirement
Only platforms that accept registered ECC DDR5 RDIMMs can use this memory. Standard consumer motherboards and non-ECC workstations will not post with these modules. Verify the workstation manual specifies RDIMM support before purchase.
商品特色
- 64 GB dual-channel kit expands workstation memory
- ECC registered design protects data integrity in critical workloads
- DDR5 4800 MT/s delivers high bandwidth for demanding applications
- 10 V operation reduces power draw under load
- Validated for Dell Precision 7960 rack and tower systems
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-324K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
商品問答
Can the DDR5 4800 CL40 ECC RDIMM kit run alongside other DDR5 memory already installed in my Precision 7960?
The kit is DDR5 4800 CL40 ECC registered memory. Mixing modules of different speeds, latencies, ranks or voltages can prevent the system from posting or force all memory to run at the lowest common settings. For best stability, populate remaining slots with identical DDR5 4800 CL40 1.1 V 2Rx8 ECC RDIMMs.
How can I verify the 64 GB kit is detected at 4800 MT/s with ECC active after installation?
Enter the system BIOS or UEFI and open the memory information page. It should show 64 GB total, 4800 MT/s operating speed, CL40 timings, 1.1 V voltage and ECC enabled. In the OS, tools such as dmidecode on Linux or CPU-Z on Windows will report the same speed, rank (2Rx8) and ECC status.
What is included in the package and do I need any extra parts to install it in the Precision 7960?
The box contains two 32 GB DDR5 4800 CL40 1.1 V 288-pin ECC RDIMM modules (part number MR38400-324K2). No additional hardware, cables, heat spreaders or software licences are required; the modules install directly into the workstation's DDR5 RDIMM slots.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



