我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 UDIMM modules in a kit

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5200 CL38 1.1V 288-Pin UDIMM SuperMicro Compatible memory upgrade

SKU CH-PA1E-093W5

64 GB kit of four 16 GB DDR5 modules at 5200 MT/s, CL38, 1.1 V, 288-pin UDIMM, validated for SuperMicro workstations

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 4X16GB

  • 64 GB total capacity from four 16 GB modules
  • DDR5 5200 speed with CL38 latency for responsive performance
  • 1 V operation keeps power draw low
  • 288-pin UDIMM form factor fits standard desktop slots
  • Validated for SuperMicro C9Z790-CGW workstation motherboards

System-specific DDR5 kit

This 64 GB kit contains four 16 GB DDR5 UDIMMs rated at 5200 MT/s with a CAS latency of 38. The modules run at 1.10 V and are validated for Supermicro desktop and SuperWorkstation platforms such as the MBD-C9Z790-CGW. Builders who need ECC or registered memory should look elsewhere.

288-pin unbuffered layout

Each stick uses a 1Rx8 organisation and fits standard 288-pin DDR5 slots without a heat spreader. The unbuffered design keeps the signal path direct for consumer and workstation boards that do not support registered DIMMs. Four slots must be free to populate the full kit.

Sustained 5200 MT/s operation

All modules are stress-tested under load to verify stability at the rated 5200 MT/s speed and CL38 timing. The low 1.10 V voltage helps maintain consistent performance during extended workloads without thermal throttling. This kit is built for continuous duty in mission-critical environments.

商品特色

  • 64 GB total capacity from four 16 GB modules
  • DDR5 5200 speed with CL38 latency for responsive performance
  • 1 V operation keeps power draw low
  • 288-pin UDIMM form factor fits standard desktop slots
  • Validated for SuperMicro C9Z790-CGW workstation motherboards

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4X16GB) DDR5 5200MHZ PC5-41600 1Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the CL38 latency hold up during sustained heavy workloads?

The modules run at DDR5 5200 with a CAS latency of CL38, which is the rated timing under continuous operation.

How much heat and power do four sticks draw when running all day?

Each 16 GB module operates at 1.10 V without a heat spreader, so total power scales with the 64 GB kit under load.

Which motherboard slot and chipset combination is required for this kit to function?

The 288-pin DDR5 UDIMM design fits Supermicro boards such as the MBD-C9Z790-CGW that support non-ECC unbuffered memory.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。