我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V 288-pin UDIMM for Supermicro X14SAZ-TLN4F memory upgrade

SKU CH-1SGZ-9EHTQ

A 64 GB DDR5 kit of four 16 GB UDIMMs running at 5600 MT/s with CL46 latency and 1.1 V, matched to the Supermicro X14SAZ-TLN4F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 4X16GB

  • 64GB total capacity for demanding workloads using four 16GB modules
  • DDR5 5600 speed with CL46 latency for responsive data access
  • 1V operation reduces power draw while maintaining rated performance
  • 288-pin UDIMM form factor matches the Supermicro X14SAZ-TLN4F motherboard exactly
  • Built with major OEM chips from Samsung Micron or Hynix for verified stability

64 GB DDR5 kit for Supermicro X14SAZ-TLN4F

This 64 GB kit contains four 16 GB DDR5 5600 UDIMM modules built to the exact rank, voltage and timing the Supermicro X14SAZ-TLN4F memory controller expects. It is intended for system builders or IT staff upgrading that specific motherboard to its full supported capacity with Non-ECC unbuffered memory.

Major OEM chips and verified fitment

Modules use Samsung, Micron or Hynix components tested at 1.1 V, CL46 and 5600 MT/s so the board recognises the full 64 GB at rated speed without manual tuning. The kit matches the 288-pin UDIMM form factor and 1Rx8 organisation the motherboard requires, avoiding the compatibility issues that ECC or registered DIMMs would cause.

No heat spreader, standard UDIMM connectors

Bare modules fit tight DIMM slots on the X14SAZ-TLN4F without clearance concerns, and the 288-pin edge connector seats directly in the board's native DDR5 slots. Buyers who need ECC error correction, registered buffering or a different capacity per module should look elsewhere, as this kit provides only Non-ECC unbuffered 16 GB sticks.

商品特色

  • 64GB total capacity for demanding workloads using four 16GB modules
  • DDR5 5600 speed with CL46 latency for responsive data access
  • 1V operation reduces power draw while maintaining rated performance
  • 288-pin UDIMM form factor matches the Supermicro X14SAZ-TLN4F motherboard exactly
  • Built with major OEM chips from Samsung Micron or Hynix for verified stability

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 1Rx8 DDR5 modules need any firmware updates or component swaps over their service life?

The kit uses standard 1Rx8 DDR5 chips from major OEM suppliers and runs at the JEDEC 1.1 V specification; no firmware updates or component replacements are required during normal operation.

What is the first limit reached when the 64 GB kit runs at 5600 MT/s continuously?

The memory controller's thermal and signal-integrity envelope at CL46 1.1 V operation is the limiting factor before any module-level constraint appears.

How much heat and power does the 4 x 16 GB DDR5 kit produce during all-day workloads?

At the rated 1.1 V the four unbuffered modules draw only the power needed for 5600 MT/s CL46 operation, generating modest heat that standard case airflow handles without extra cooling.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。