我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V ECC RDIMM Supermicro H14SHM

SKU CH-JN0P-EAVDE

64 GB DDR5 5600 CL46 ECC RDIMM kit (4×16 GB, 1.1 V) validated for Supermicro H14SHM servers

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity from four 16 GB modules for full server utilisation
  • DDR5 5600 speed with CL46 latency at 1.1 V for efficient data throughput
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 288-pin RDIMM form factor matches Supermicro H14SHM motherboard requirements exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Exact-Match DDR5 RDIMM Kit

This 64GB kit contains four 16GB DDR5 5600 CL46 registered ECC modules built to 1.1V. The 288-pin RDIMM form factor matches the Supermicro H14SHM memory controller requirements so the system recognises full capacity at rated speed.

Suited for Supermicro H14SHM Upgrades

Builders populating all four slots on that specific motherboard will get registered buffering and on-the-fly error correction. Buyers with consumer boards, laptops or any platform needing unbuffered UDIMMs or SODIMMs cannot use this kit.

Build Integration Notes

Registered architecture offloads the memory controller, allowing full-slot population without signal degradation. ECC corrects single-bit errors before they reach production workloads. Verify the motherboard manual for approved population order and maximum supported capacity before installation.

商品特色

  • 64 GB total capacity from four 16 GB modules for full server utilisation
  • DDR5 5600 speed with CL46 latency at 1.1 V for efficient data throughput
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 288-pin RDIMM form factor matches Supermicro H14SHM motherboard requirements exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Do I need a motherboard with 288-pin DDR5 RDIMM slots to install this 64 GB kit?

Yes. The modules are 288-pin DDR5 Registered DIMMs, so the board must provide DDR5 RDIMM slots — standard UDIMM or SODIMM sockets will not accept them.

Will these CL46 1Rx8 RDIMMs run at 5600 MT/s if I mix them with older DDR5 modules in the same Supermicro H14SHM?

The kit is validated for the H14SHM at DDR5-5600. Mixing different ranks, latencies or voltages can force the memory controller to downclock all channels to the slowest common setting.

How can I confirm the full 64 GB is recognised and ECC is active after installation?

Enter the system BIOS or UEFI and check the memory information screen — it should show 64 GB total across four slots with ECC status reported as enabled or active.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。