我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 ECC RDIMM 1.1V CL40 288-Pin 2Rx4 PowerEdge XE9640 memory upgrade

SKU CH-RVZQ-05AQ6

64 GB DDR5 ECC registered DIMM running at 4800 MT/s with CL40 latency for Dell PowerEdge XE9640 servers

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB capacity supports large-scale workloads
  • DDR5 4800 speed delivers high bandwidth
  • ECC registered design protects data integrity
  • 1 V operation reduces power draw
  • Validated for Dell PowerEdge XE9640 compatibility

Dell PowerEdge XE9640 DDR5 memory upgrade

This 64GB DDR5 4800 ECC RDIMM is built for the Dell PowerEdge XE9640 rack server. It adds a single registered module with error-correcting code to protect data integrity in mission-critical workloads. The 2Rx4 organisation and CL40 latency match the platform's qualified memory profile.

Thermals noise and power draw in normal use

Operating at 1.1V, the module runs at standard DDR5 voltage without a heat spreader. Registered buffering reduces electrical load on the server memory controller during sustained throughput. ECC circuitry adds minimal overhead while correcting single-bit errors transparently.

Build fit and system requirements

The 288-pin RDIMM installs directly into the PowerEdge XE9640 DIMM slots; no extra cabling or adapters are required. One module occupies a single slot, leaving remaining channels free for further capacity expansion. Compatibility is validated for the XE9640 platform using major OEM Samsung, Micron or Hynix chips.

商品特色

  • 64 GB capacity supports large-scale workloads
  • DDR5 4800 speed delivers high bandwidth
  • ECC registered design protects data integrity
  • 1 V operation reduces power draw
  • Validated for Dell PowerEdge XE9640 compatibility

商品規格

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

商品問答

How do I install this 288-pin DDR5 RDIMM in the PowerEdge XE9640, and which step is most often missed?

Power down the server, open the chassis, align the module notch with the slot key, press firmly until both latches click, then verify the new 64GB appears in BIOS before closing the case.

What maintenance or replacement will this ECC registered module need over its service life?

No routine maintenance is required; if a correctable error count rises or the module fails, replace it with an identical 1.1V CL40 2Rx4 part to keep ECC protection intact.

What limit appears first when this memory runs sustained workloads at 4800 MT/s?

The CAS latency of CL40 sets the timing ceiling, so latency-sensitive tasks hit that boundary before bandwidth saturates the PC5-38400 interface.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。