我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips in a 288-pin DDR5 RDIMM form factor

NEMIX RAM

NEMIX RAM 64GB DDR5 5600MHz ECC RDIMM 2Rx4 CL46 1.1V Supermicro H13SSF memory upgrade

SKU CH-T2HA-DYAE2

64GB DDR5 5600MHz ECC registered RDIMM built for the Supermicro H13SSF motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 64 GB DDR5 5600 MHz capacity runs at rated speed on Supermicro H13SSF
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 2Rx4 rank and 1.10 V match the motherboard's exact timing requirements
  • 288-pin RDIMM form factor fits the H13SSF slots without adapters
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise stability

Exact-match DDR5 RDIMM for Supermicro H13SSF

This 64 GB DDR5 5600 MHz ECC Registered RDIMM is built to the Supermicro H13SSF motherboard's precise requirements. The 2Rx4 rank structure, 1.1 V operating voltage and CL46 latency match the memory controller's expectations so the module is recognised at full capacity and runs at its rated PC5-44800 speed. It targets server administrators who need guaranteed compatibility without trial-and-error.

Straightforward installation

The 288-pin RDIMM slots into the board's DDR5 DIMM sockets exactly like any registered module; no special tools are required. Because the memory is registered and ECC-enabled, the system must be populated in the order specified by the motherboard manual — mixing ranks or skipping slots will prevent boot or reduce capacity. The lack of a heat spreader means clearance is minimal, but verify that adjacent components do not contact the bare PCB.

Verify population limits

Check the H13SSF manual for maximum supported capacity per slot, approved DIMM population sequences and any BIOS version required for DDR5 5600 operation. Registered ECC memory will not function in consumer desktop boards or in systems that only accept unbuffered UDIMMs. Confirm your chassis has enough airflow for fully populated memory banks, as the modules run without heatsinks.

商品特色

  • 64 GB DDR5 5600 MHz capacity runs at rated speed on Supermicro H13SSF
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 2Rx4 rank and 1.10 V match the motherboard's exact timing requirements
  • 288-pin RDIMM form factor fits the H13SSF slots without adapters
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise stability

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

How do I verify the module is running at 5600 MHz with CL46 after installing it in my Supermicro H13SSF?

Check the BIOS or UEFI memory information screen; it should report DDR5-5600 (PC5-44800) speed, CL46 latency, 1.10 V, and 64 GB capacity for the installed RDIMM.

What comes in the package and do I need any extra parts to install this memory?

The box contains one 64 GB 288-pin DDR5 ECC Registered RDIMM; no additional cables, brackets or heat spreaders are required for installation in the H13SSF.

Should I choose the 2Rx4 version or a different rank configuration for this motherboard?

The H13SSF memory controller expects 2Rx4 registered ECC modules; this exact rank and organization matches the board's population rules for full-capacity operation.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。