我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 1.2V 260-pin SODIMM for POSIFLEX TK-3251 Paragon Kiosk memory upgrade

SKU CH-PAB6-WAF90

An 8 GB DDR4 SODIMM running at 3200 MHz with CL22 latency, 1.20 V and 2Rx8 chips, built specifically for the POSIFLEX TK-3251 Paragon kiosk

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands kiosk multitasking headroom
  • DDR4 3200 speed matches POSIFLEX TK-3251 spec
  • CL22 latency keeps data flowing smoothly
  • 2 V operation lowers power draw and heat
  • 260-pin SODIMM form factor fits the Paragon slot

POSIFLEX TK-3251 compatible SODIMM

This 8 GB DDR4 module is built specifically for the POSIFLEX TK-3251 Paragon kiosk series. It arrives as a single 260-pin SODIMM rated at 3200 MT/s with CL22 latency. The stick is non-ECC, unbuffered and runs at 1.20 V, matching the platform's standard memory specification.

DDR4 3200 SO-DIMM speed ceiling

DDR4 3200 (PC4-25600) is the maximum JEDEC speed this form factor officially supports; the memory controller will not negotiate a higher data rate. CL22 timing is the baseline for this frequency bin, so tighter latencies are not available without leaving the standard. The 2Rx8 organisation is fixed by the 8 GB density and cannot be changed.

Verify kiosk slot count and maximum capacity

Confirm the TK-3251 chassis has a free SODIMM slot before ordering; some configurations ship with both sockets populated. Check the system documentation for the maximum supported memory per slot and in total, as exceeding that limit will prevent boot. The module requires a DDR4 SO-DIMM socket keyed for 260 pins.

商品特色

  • 8 GB capacity expands kiosk multitasking headroom
  • DDR4 3200 speed matches POSIFLEX TK-3251 spec
  • CL22 latency keeps data flowing smoothly
  • 2 V operation lowers power draw and heat
  • 260-pin SODIMM form factor fits the Paragon slot

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

商品問答

Should I choose a single 8GB SODIMM or a different capacity for the POSIFLEX TK-3251 Paragon kiosk?

This module is an 8GB DDR4 3200 CL22 2Rx8 SODIMM. Select it if the kiosk has a free slot and you need exactly 8GB. For other totals, match the same speed, voltage, rank and pin count.

What does the 3200 MT/s rating deliver once installed in the POSIFLEX TK-3251?

The module runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.20V. Actual throughput depends on the kiosk's memory controller and whether it operates in single or dual-channel mode.

Which interface standard does the 260-pin SODIMM use and what does it limit?

It uses the DDR4 SODIMM standard. The 260-pin form factor, 1.20V operation and PC4-25600 rating define the electrical and mechanical limits for the POSIFLEX TK-3251 slot.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。