我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board SODIMM memory module with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 1.2V 260-pin SODIMM POSIFLEX TK-2151 memory upgrade

SKU CH-H15W-80H3B

8GB DDR4 3200 SODIMM for POSIFLEX TK-2151 kiosk, CL22, 1.2V, 260-pin, unbuffered

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB DDR4 3200 MHz module lifts kiosk responsiveness
  • CL22 latency at 1.20 V keeps power draw low
  • 2Rx8 dual-rank layout maximises bandwidth on POSIFLEX TK-2151
  • 260-pin SODIMM form factor fits the Stellar Series slot directly
  • Major OEM Samsung, Micron or Hynix chips ensure stable operation

POSIFLEX TK-2151 memory upgrade

This 8 GB DDR4 SODIMM is built for the POSIFLEX TK-2151 Stellar Series kiosk. It replaces or adds a single module in point-of-sale terminals that require 260-pin unbuffered memory. The kit targets technicians and integrators who service these specific systems.

Tool-free slot access on most kiosks

Installation takes minutes by opening the service panel and seating the module until the clips engage. The 2Rx8 organisation and CL22 timing follow the platform defaults, so the BIOS recognises the stick without manual configuration. No heat spreader means the board must provide adequate airflow.

Steady throughput during long shifts

Rated at 3200 MT/s and 1.20 V, the module maintains its spec under continuous transaction workloads. Samsung, Micron or Hynix ICs are stress-tested at load before shipping, reducing the chance of errors during extended retail or hospitality operating hours. Non-ECC design suits the target platform.

商品特色

  • 8 GB DDR4 3200 MHz module lifts kiosk responsiveness
  • CL22 latency at 1.20 V keeps power draw low
  • 2Rx8 dual-rank layout maximises bandwidth on POSIFLEX TK-2151
  • 260-pin SODIMM form factor fits the Stellar Series slot directly
  • Major OEM Samsung, Micron or Hynix chips ensure stable operation

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

商品問答

How can I verify the DDR4 3200 CL22 module is running correctly after installing it in my POSIFLEX TK-2151 kiosk?

Enter the system BIOS or UEFI on boot and confirm the memory shows 8 GB at 3200 MT/s with CL22 timings at 1.20 V. The POST screen should also report the full 8 GB capacity without errors.

What exactly is included in the package and do I need any extra parts for the POSIFLEX TK-2151 installation?

The box contains one 8 GB 260-pin DDR4 SODIMM (part MS25600-828K1). No additional cables, brackets or tools are required; the module fits directly into the kiosk's SO-DIMM slot.

Which capacity or rank option should I choose for the POSIFLEX TK-2151 Stellar Series kiosk?

This listing is the single 8 GB 2Rx8 module (MS25600-828K1) validated for the TK-2151. Select this version when you need one 8 GB stick; add a second identical module only if your service manual confirms dual-channel support.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。