我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green bare circuit board DDR4 RDIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 PC4-25600 ECC RDIMM Supermicro H12SSW-NT memory upgrade

SKU CH-25BV-94MD2

An 8 GB DDR4 3200 ECC registered DIMM tested for Supermicro H12SSW-NT EPYC servers

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on dense server boards
  • 3200 MT/s throughput matches AMD EPYC memory controller spec
  • 20 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits Supermicro H12SSW-NT slots

NEMIX RAM 8GB DDR4 3200 ECC RDIMM

This 8GB DDR4 3200 ECC registered DIMM is built for the Supermicro H12SSW-NT motherboard. It targets administrators expanding memory in AMD EPYC-based servers or workstations that require registered error-correcting modules. The single-rank 1Rx8 organisation and 1.2 V operation match the platform's registered memory requirements.

Installation and common issues

The 288-pin RDIMM installs in the standard DDR4 slots of the H12SSW-NT board; no special tools are required beyond opening the chassis and seating the module until the retention clips latch. Because the module is registered, it must be used in slots designated for registered memory and cannot be mixed with unbuffered DIMMs. A frequent mistake is populating slots in the wrong order — consult the motherboard manual for the approved population sequence.

Who this suits and who should look elsewhere

This module suits IT professionals adding capacity to a verified Supermicro H12SSW-NT system where ECC registered memory is mandatory. It is not appropriate for builds that need unbuffered non-ECC DIMMs, for platforms that only support DDR5, or for buyers who require higher-capacity sticks than the 8 GB provided here.

商品特色

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on dense server boards
  • 3200 MT/s throughput matches AMD EPYC memory controller spec
  • 20 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits Supermicro H12SSW-NT slots

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

商品問答

How can I verify the DDR4 3200 module is running at PC4-25600 speed after installing it in the Supermicro H12SSW-NT?

Enter the BIOS and confirm the memory speed reads 3200 MT/s with CL22 timings at 1.20 V; the EPYC memory controller will show 1Rx8 registered ECC operation for the 288-pin RDIMM.

What comes in the package and is anything else required for the Supermicro H12SSW-NT?

The box contains one 8 GB DDR4 3200 CL22 1.20 V 288-pin ECC RDIMM (part MR25600-818K1); no additional parts or cables are needed for installation.

Which capacity should I choose for the Supermicro H12SSW-NT if I want registered ECC DDR4 3200?

This listing is the 8 GB 1Rx8 registered ECC RDIMM (MR25600-818K1); select it when you need a single 8 GB DDR4 3200 module for the H12SSW-NT.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。