我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips, gold edge connector, compact SODIMM form factor

NEMIX RAM

NEMIX RAM 8GB DDR4 3200MHz CL22 1Rx8 SODIMM Supermicro X12STN memory upgrade

SKU CH-T12K-D6VT5

8GB DDR4 3200MHz SODIMM module with CL22 timing and 1.2V operation, verified for Supermicro X12STN series motherboards

  • Capacity8GB
  • Type260-Pin DDR4 SODIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo

Size 8GB

  • 8GB capacity expands system memory for smoother multitasking
  • DDR4 3200MHz speed matches the motherboard's rated frequency
  • CL22 latency and 1.20V voltage meet the controller's exact timing requirements
  • 260-pin SODIMM form factor fits Supermicro X12STN series slots precisely
  • Built with major OEM chips from Samsung, Micron or Hynix for tested stability

Exact-match upgrade for Supermicro X12STN

This 8 GB DDR4 SODIMM module runs at 3200 MHz with CL22 latency and 1.2 V operation. It uses a 1Rx8 rank layout on a 260-pin unbuffered non-ECC PCB built from major OEM chips. The specification matches the memory controller requirements of Supermicro X12STN series motherboards so the module is recognised at full capacity and rated speed.

Sustained-load behaviour

The module maintains its rated 3200 MHz transfer rate under continuous read and write workloads because the 1.2 V supply and CL22 timing are validated for stable long-term operation. Unbuffered non-ECC construction keeps the signal path short which helps consistent throughput during extended compile jobs or virtual machine hosting without thermal throttling from a heat spreader.

DDR4 SODIMM interface limits

The 260-pin DDR4 SODIMM form factor caps the electrical interface at the PC4-25600 data rate and 1.2 V signalling defined by the JEDEC standard. Capacity is fixed at 8 GB per module so systems needing more memory must populate additional slots according to the motherboard population rules. Builders who need ECC error correction or registered buffering cannot use this module.

商品特色

  • 8GB capacity expands system memory for smoother multitasking
  • DDR4 3200MHz speed matches the motherboard's rated frequency
  • CL22 latency and 1.20V voltage meet the controller's exact timing requirements
  • 260-pin SODIMM form factor fits Supermicro X12STN series slots precisely
  • Built with major OEM chips from Samsung, Micron or Hynix for tested stability

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered SODIMM Memory
Part NumberMS25600-818K1
Capacity8GB
Type260-Pin DDR4 SODIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 260-PIN Non-ECC SODIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much power does the 1.2 V SODIMM draw under continuous load?

The module operates at 1.2 V with a CL22 timing, the standard voltage for DDR4 SODIMMs, so power draw stays within the platform's normal memory budget.

What must the Supermicro X12STN motherboard already provide for this 260-pin module to work?

The board needs an available DDR4 SODIMM slot that accepts 1Rx8 Non-ECC Unbuffered memory at 3200 MHz (PC4-25600) and follows the manual's population order.

Will the CL22 timing slow down older DDR4 modules already installed in the system?

The memory controller will run all populated slots at the lowest common speed and timing, so existing modules set the pace if they are slower than 3200 MHz CL22.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。