BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278322BTC
現貨
NEMIX RAM
NEMIX RAM 8GB DDR5 5600MHz CL46 1.1V 288-Pin UDIMM Memory Upgrade
An 8 GB DDR5 module running at 5600 MHz with CL46 latency and 1.1 V operation for the ASUS ProArt X870E-CREATOR WiFi motherboard
- Capacity8GB
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 8GB capacity expands desktop multitasking headroom
- DDR5 5600 speed lifts data throughput to PC5-44800
- CL46 latency keeps response tight at 1.10V
- 288-pin UDIMM fits ASUS ProArt X870E-CREATOR WiFi board
- Major OEM chips from Samsung, Micron, Hynix ensure module reliability
8GB DDR5 UDIMM for ASUS ProArt X870E-CREATOR
This 8GB DDR5 5600MHz CL46 module is built for desktop users upgrading an ASUS ProArt X870E-CREATOR WiFi motherboard. It delivers 1Rx8 unbuffered non-ECC memory at 1.1V for standard system workloads.
Verify DDR5 slot availability
Confirm the motherboard has a free 288-pin DDR5 UDIMM slot and that the installed processor supports DDR5 5600 operation. The board must accept non-ECC unbuffered modules at 1.1V. Check the manual for maximum capacity per slot and total system limit before ordering.
Single 8GB stick enables flexible capacity scaling
The package contains one 8GB module without a heat spreader, leaving clearance for large CPU coolers. Adding this stick increases total memory in 8GB increments, letting you match the workload without committing to a matched pair or a larger kit upfront.
商品特色
- 8GB capacity expands desktop multitasking headroom
- DDR5 5600 speed lifts data throughput to PC5-44800
- CL46 latency keeps response tight at 1.10V
- 288-pin UDIMM fits ASUS ProArt X870E-CREATOR WiFi board
- Major OEM chips from Samsung, Micron, Hynix ensure module reliability
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-818K1 |
| Capacity | 8GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1 x 8GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM |
商品問答
Does the module come alone or as a kit, and is anything else required for installation?
The box contains a single 8 GB stick (1 x 8 GB). No extra parts are needed; it fits a standard 288-pin DDR5 UDIMM slot.
Should I choose the CL46 5600 MHz version or a different speed if my board supports higher frequencies?
This stick runs at 5600 MHz with CL46 latency at 1.1 V. Pick it when your motherboard lists DDR5-5600 as the maximum supported speed.
What does the 5600 MHz rating actually deliver once the module is seated in my ASUS ProArt X870E-CREATOR WiFi board?
The module operates at DDR5-5600 (PC5-44800) with 1Rx8 organisation, giving the board its rated 5600 MT/s data rate at CL46 timings.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
