我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 96GB (2×48GB) DDR5-6400 CL52 1.1V ECC Registered RDIMM Supermicro H13SRH

SKU CH-P3Z7-4R743

96GB dual-rank DDR5-6400 registered ECC RDIMM kit validated for Supermicro H13SRH motherboards

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity from two 48 GB modules for high-density server workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput for Supermicro H13SRH
  • 1 V registered ECC RDIMM architecture reduces controller load and corrects single-bit errors
  • 288-pin 2Rx8 form factor matches the motherboard's exact slot and population requirements
  • Lifetime replacement warranty with US-based technical support included

Exact DDR5-6400 ECC RDIMM kit for Supermicro H13SRH

This 96 GB kit contains two 48 GB registered ECC modules built to the DDR5-6400 (PC5-51200) standard with CL52 timing and 1.10 V operation. It targets administrators who need a precise, server-grade upgrade for the Supermicro H13SRH motherboard without guesswork.

Straightforward 288-pin RDIMM install.

The modules use the standard 288-pin RDIMM form factor this board requires, not UDIMM or SODIMM. Installation is routine, but the manual must be checked for supported capacities, approved slot order and any BIOS revision notes before powering on; ignoring population rules is the usual cause of non-recognition.

Registered 2Rx8 ECC at 1.10 V decides fit

The combination of registered (buffered) architecture, 2Rx8 organization, ECC and 1.10 V voltage is the single specification the memory controller expects. If the platform demands a different rank structure, voltage or unbuffered DIMMs, this kit will not function.

商品特色

  • 96 GB capacity from two 48 GB modules for high-density server workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput for Supermicro H13SRH
  • 1 V registered ECC RDIMM architecture reduces controller load and corrects single-bit errors
  • 288-pin 2Rx8 form factor matches the motherboard's exact slot and population requirements
  • Lifetime replacement warranty with US-based technical support included

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

商品問答

How can I confirm the DDR5-6400 CL52 1.1V ECC RDIMM kit is running at its rated speed after installation?

Enter the system BIOS or UEFI on the Supermicro H13SRH and verify the memory frequency shows 6400 MT/s, the CAS latency reads CL52, and the voltage is set to 1.10V. The registered ECC modules should also report 96 GB total capacity with 2Rx8 organisation.

What is included in the package and do I need any extra components for the Supermicro H13SRH?

The kit contains two 48 GB 288-pin DDR5 RDIMM modules (part number MR51200-4828K2). No additional memory parts are required; the modules are keyed for the board's registered DIMM slots and include on-die ECC.

Should I choose a different capacity or speed version for the H13SRH motherboard?

This 96 GB (2×48 GB) DDR5-6400 CL52 1.1V registered ECC kit matches the Supermicro H13SRH's qualified memory list. Other capacities or speeds are not validated for this board, so the listed kit is the correct selection.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。