我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 96GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-4ZXN-3P655

Adds 96 GB of DDR5 4800 CL40 ECC registered memory to Supermicro H13DSH servers

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 96GB capacity lets Supermicro H13DSH run fully populated at rated speed
  • DDR5 4800 CL40 matches the board's exact timing and voltage requirements
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 2Rx4 288-pin RDIMM form factor fits the motherboard's memory population rules
  • Lifetime replacement warranty with US-based technical support backs every module

96GB DDR5 4800 ECC RDIMM

This is a 96GB DDR5 4800 (PC5-38400) 2Rx4 registered ECC RDIMM from NEMIX RAM. It operates at 1.1V with CL40 latency and uses the 288-pin form factor required by the Supermicro H13DSH motherboard. The module is built with major OEM chips and has no heat spreader.

For servers that need registered ECC memory

This memory suits administrators upgrading a Supermicro H13DSH system that requires registered DDR5 ECC RDIMMs with exact rank and voltage matching. It is not for workstations or desktops that accept only unbuffered UDIMMs, nor for laptops or small-form-factor boards that use SODIMM modules.

Check your motherboard manual before ordering

Verify the maximum supported capacity per slot and the approved DIMM population order for the H13DSH. Confirm the board requires 288-pin registered DDR5 RDIMMs and that your configuration allows the 2Rx4 organisation at 1.1V. Ensure all slots are populated according to the manufacturer's guidelines.

商品特色

  • 96GB capacity lets Supermicro H13DSH run fully populated at rated speed
  • DDR5 4800 CL40 matches the board's exact timing and voltage requirements
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 2Rx4 288-pin RDIMM form factor fits the motherboard's memory population rules
  • Lifetime replacement warranty with US-based technical support backs every module

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What motherboard slot type does the 288-pin DDR5 RDIMM require on the Supermicro H13DSH?

The module uses a 288-pin DDR5 RDIMM form factor, so the board must provide registered DDR5 DIMM slots matching that pin count and keying.

Can the 2Rx4 registered ECC modules run in slots previously filled with unbuffered UDIMMs on the same platform?

No, registered RDIMMs and unbuffered UDIMMs use different electrical signalling and cannot be mixed; the H13DSH requires registered modules for full-capacity operation.

How do I confirm the kit is detected at 96 GB and 4800 MT/s after installation?

Check the BIOS memory information screen or run a hardware inventory tool; it should report 96 GB total capacity, DDR5-4800 speed, CL40 latency and ECC active.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。