我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM DDR5 5600 384GB (4×96GB) ECC Registered RDIMM memory upgrade

SKU CH-X2A7-HRG26

A 384 GB kit of four 96 GB DDR5-5600 registered ECC RDIMMs at 1.1 V and CL46, validated for the Supermicro H14DSH motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity from four 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design offloads the memory controller and corrects single-bit errors
  • 10 V operation at 2Rx4 rank matches server memory-controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H14DSH motherboard

384 GB DDR5 ECC RDIMM kit

This NEMIX RAM kit provides 384 GB of DDR5-5600 registered ECC memory in four 96 GB modules. It is built for servers and workstations that require high-capacity, error-correcting RDIMMs running at 1.1 V with CL46 latency.

Verify Supermicro H14DSH memory rules

Check your motherboard manual for the approved DIMM population order and maximum supported capacity per slot before ordering. The 288-pin registered form factor must match the board's requirements and the 2Rx4 rank configuration must be supported by your specific CPU and BIOS revision.

Registered design aids thermal stability

The registered architecture buffers address and command signals reducing electrical load on the memory controller during full-population operation. Operating at 1.1 V the modules draw minimal power for their density while ECC correction runs transparently in the background.

商品特色

  • 384 GB total capacity from four 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design offloads the memory controller and corrects single-bit errors
  • 10 V operation at 2Rx4 rank matches server memory-controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H14DSH motherboard

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What comes in the kit and do I need any extra parts to install it in a Supermicro H14DSH?

The kit contains four 96 GB DDR5-5600 registered ECC RDIMMs totalling 384 GB. No additional components are required; the modules slot directly into the board's 288-pin DDR5 RDIMM sockets.

How do I decide between the available capacities for this memory line?

This part number is offered only as a 384 GB kit of four 96 GB modules. If your H14DSH configuration calls for a different total capacity, you would need a separate kit with the matching module count and density.

What does the DDR5-5600 CL46 rating mean once the modules are running in the server?

The memory will operate at 5600 MT/s with a CAS latency of 46 cycles at 1.1 V. The registered design and ECC let all four slots run fully populated at that rated speed while correcting single-bit errors on the fly.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。