我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 5600 384GB (4x96GB) ECC RDIMM CL46 1.1V Supermicro X14SDV-42C-SP3F memory upgrade

SKU CH-0YS1-HRS9T

384 GB DDR5-5600 ECC registered RDIMM kit, four 96 GB modules at CL46 and 1.1 V, validated for Supermicro X14SDV-42C-SP3F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

  • 384 GB total capacity across four 96 GB modules
  • DDR5 5600 MT/s speed with CL46 latency for rated throughput
  • ECC and registered design corrects errors and buffers signals for stability
  • 1 V operation matches the server memory controller specification
  • Verified fitment for Supermicro X14SDV-42C-SP3F motherboard with 288-pin RDIMM slots

Supermicro X14SDV-42C-SP3F upgrade kit

This 384GB kit supplies four 96GB DDR5 RDIMMs built to the exact rank, voltage and timing the Supermicro X14SDV-42C-SP3F memory controller expects. The modules are new ECC Registered DIMMs that slot straight into the board's 288-pin sockets and are recognised at full capacity without manual tuning.

Capacity and headroom

Four dual-rank 96GB modules deliver 384GB total, letting the platform run fully populated at DDR5-5600 while ECC corrects single-bit errors on the fly. Workloads that exceed this address space or demand higher frequencies will need a different motherboard or DIMM density.

Thermals noise and power

Each module operates at 1.1V with no heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, keeping power draw predictable and acoustic profile unchanged in normal operation.

商品特色

  • 384 GB total capacity across four 96 GB modules
  • DDR5 5600 MT/s speed with CL46 latency for rated throughput
  • ECC and registered design corrects errors and buffers signals for stability
  • 1 V operation matches the server memory controller specification
  • Verified fitment for Supermicro X14SDV-42C-SP3F motherboard with 288-pin RDIMM slots

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will this 384GB DDR5 5600 kit run at full speed on my Supermicro X14SDV-42C-SP3F with existing RDIMMs installed?

The kit is spec-matched to the X14SDV-42C-SP3F memory controller at DDR5 5600 CL46 1.1V 2Rx4. Mixing ranks or voltages can force the controller to downclock all slots, so check the board manual for approved population rules before adding these four 96GB modules alongside other DIMMs.

How do I confirm the 4x96GB ECC RDIMM kit is detected at 384GB and running at PC5-44800 after installation?

Enter the BIOS or UEFI on the Supermicro X14SDV-42C-SP3F and verify total memory shows 384GB, speed reads DDR5 5600 (PC5-44800), and ECC status is active. Registered (buffered) architecture and 2Rx4 organisation should also be reported for each of the four 288-pin slots.

Does the MR44800-9624K4 box include heatsinks or mounting hardware, or must I buy them separately?

The package contains only the four 96GB DDR5 5600 CL46 1.1V 288-pin ECC Registered RDIMM modules. No heat spreaders, brackets, or additional accessories are included, and none are required for standard server DIMM slots on the X14SDV-42C-SP3F.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。