SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501792BTC
現貨
NEMIX RAM
NEMIX RAM DDR5 6400 384GB (4x96GB) CL52 1.1V 2Rx4 ECC RDIMM Supermicro H14DSG-OD memory upgrade
A 384 GB DDR5 server memory kit with four 96 GB registered ECC RDIMMs running at 6400 MT/s, CL52, 1.1 V, validated for the Supermicro H14DSG-OD motherboard
- Capacity384GB (4 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity across four 96 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated throughput on compatible boards
- Registered ECC RDIMM architecture corrects single-bit errors and buffers every slot
- 1 V operation at 2Rx4 rank matches the memory controller's exact requirements
- Validated for Supermicro H14DSG-OD motherboard with 288-pin RDIMM form factor
Exact-match DDR5 kit for Supermicro H14DSG-OD
This 384 GB kit contains four 96 GB DDR5-6400 registered ECC RDIMMs built to the precise rank, voltage and timing the motherboard expects. It is intended for administrators who need to populate every slot with validated modules that the firmware recognises at full capacity and rated speed.
384 GB capacity with registered ECC headroom
The four 2Rx4 modules deliver 384 GB of addressable memory while the registered architecture offloads the memory controller so every slot runs fully populated. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. The kit stops at the board's maximum supported population; systems requiring more memory need a different platform.
288-pin RDIMM form factor for direct installation
Each module uses the 288-pin RDIMM form factor this motherboard requires, not UDIMM or SODIMM, and operates at 1.1 V with CL52 latency. Installation follows the board's specific population order, so the manual must be consulted before purchase. No heat spreader is included, leaving clearance for dense server chassis airflow.
商品特色
- 384 GB total capacity across four 96 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated throughput on compatible boards
- Registered ECC RDIMM architecture corrects single-bit errors and buffers every slot
- 1 V operation at 2Rx4 rank matches the memory controller's exact requirements
- Validated for Supermicro H14DSG-OD motherboard with 288-pin RDIMM form factor
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
商品問答
Will this 384GB DDR5 6400 kit work with the Supermicro H14DSG-OD board I already have?
The kit is an exact-match upgrade verified for the Supermicro H14DSG-OD motherboard. It uses the 288-pin RDIMM form factor, 1.1V voltage, 2Rx4 rank and CL52 timing that the board's memory controller expects.
How can I confirm the DDR5 6400 modules are running at full speed after installation?
Enter the BIOS and verify the memory speed shows 6400 MT/s (PC5-51200) with CL52 latency and 1.1V applied. The registered ECC design lets every slot run fully populated at the rated specification.
What comes in the box and do I need anything else to install it?
The box contains four 96GB DDR5 6400 RDIMM modules for a total of 384GB. No heat spreaders or extra cables are included; install directly into the motherboard's DIMM slots following the population order in your system manual.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
