我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
A green printed circuit board with black memory chips and gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM MD44800-4828K1 48GB DDR5 5600 CL46 2Rx8 1.1V 288-pin UDIMM Supermicro X13SAE memory upgrade

SKU CH-BMHN-T2XXD

48 GB DDR5-5600 CL46 2Rx8 1.1 V unbuffered UDIMM kit validated for the Supermicro X13SAE motherboard

  • Capacity48GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 48GB

  • Ready for Supermicro X13SAE with exact DDR5-5600 timing
  • 48GB capacity at 1.10V for full-speed operation
  • CL46 2Rx8 organisation matches board memory rules
  • Built with Samsung, Micron or Hynix OEM chips
  • 288-pin UDIMM form factor fits desktop DIMM slots

Exact-fit DDR5 upgrade

This 48 GB DDR5 5600 module is built for the Supermicro X13SAE motherboard. It uses the 288-pin UDIMM form factor that board requires, not an ECC server stick or SODIMM. The 2Rx8 rank and 1.1 V voltage match the controller's expectations so the full capacity is recognised at rated speed. Builders upgrading that specific platform can install it without guessing compatibility.

2Rx8 rank at CL46 timing

The single specification that decides fit is the 2Rx8 organisation combined with CL46 latency at 1.10 V. The memory controller on the target board is programmed for this exact rank structure and timing pair; a different rank count or latency would prevent the system from posting at 5600 MT/s. No other speed, voltage or ECC variant is offered in this part number.

Major OEM chips tested at rated spec

The kit ships with Samsung, Micron or Hynix ICs that have been validated for stability at DDR5 5600, CL46 and 1.10 V. There is no heat spreader, so airflow in the chassis must handle thermal load directly. The package contains only the memory module itself; no extra cables, software licences or mounting hardware are included.

商品特色

  • Ready for Supermicro X13SAE with exact DDR5-5600 timing
  • 48GB capacity at 1.10V for full-speed operation
  • CL46 2Rx8 organisation matches board memory rules
  • Built with Samsung, Micron or Hynix OEM chips
  • 288-pin UDIMM form factor fits desktop DIMM slots

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K1
Capacity48GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 5600 speed run at its rated frequency on my Supermicro X13SAE motherboard?

The module is specified as an exact-match upgrade for the Supermicro X13SAE and tested to operate at DDR5 5600 with CL46 timings at 1.1 V, so the memory controller will recognise the full 48 GB at the rated speed.

What does the PC5-44800 label on this UDIMM tell me about the interface limit?

PC5-44800 denotes the DDR5 5600 standard, meaning the 288-pin unbuffered UDIMM interface is rated for a maximum data rate of 5600 MT/s on this platform.

Does the 288-pin 2Rx8 UDIMM fit straight into the Supermicro X13SAE DIMM slots?

Yes, the kit uses the standard 288-pin DDR5 UDIMM form factor with 2Rx8 organisation, matching the physical and electrical requirements of the X13SAE motherboard slots.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。