NEMIX RAM MD44800-818K2 16GB (2x8GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade
- 16GB (2 x 8GB)
- 288-Pin DDR5 UDIMM
NEMIX RAM
16 GB dual-channel DDR5-5600 kit (2 × 8 GB, CL46, 1.1 V, 288-pin UDIMM) validated for the NZXT N7 B850 motherboard
Size 16GB 2X8GB
This 16 GB kit uses two 8 GB DDR5 modules rated at 5600 MT/s with CL46 timing and 1.1 V operation. It is built for the NZXT N7 B850 motherboard and matches the board's 288-pin UDIMM slot layout. The unbuffered, non-ECC design suits standard desktop workloads. Builders who need ECC error correction or higher capacities should look elsewhere.
DDR5 5600 (PC5-44800) runs at the JEDEC base data rate without overclocking headroom. The CL46 latency is fixed at this speed tier and cannot be tightened without exceeding the rated voltage. The 1Rx8 organisation caps density per module at 8 GB. Systems that require registered or load-reduced DIMMs will not accept these modules.
Swapping a 4800 MT/s kit for this 5600 MT/s set raises bandwidth at the same voltage and form factor. Moving from a single 8 GB stick to this dual-channel 16 GB kit also enables interleaved access. The jump is worthwhile when the motherboard supports DDR5 5600 natively and the workload benefits from extra throughput.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | NZXT |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB 2X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The 2x8GB kit enables dual-channel operation on the NZXT N7 B850, giving higher bandwidth than a single 16GB stick while matching the board's DDR5-5600 spec.
The kit runs at 5600 MT/s with CL46 latency at 1.1V, providing the exact speed and timing the NZXT N7 B850 memory controller expects for stable operation.
Yes, the 288-pin unbuffered UDIMM form factor matches the NZXT N7 B850's DDR5 slots; it is not an ECC or SODIMM module and fits the board's population rules.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?