我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM MR51200-9624K1 96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM memory upgrade

SKU CH-2SBJ-WKTNJ

96 GB DDR5 6400 ECC registered RDIMM with CL52 latency and 1.1 V operation, validated for Supermicro H14DSG-O-CPU motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 96GB capacity supports large server workloads
  • DDR5 6400 speed delivers rated data throughput
  • CL52 latency matches controller timing expectations
  • 2Rx4 registered ECC architecture enables full-slot stability
  • 1V operation meets motherboard voltage requirements

96GB DDR5 ECC RDIMM for Supermicro H14DSG-O-CPU

This 96GB DDR5 6400 registered ECC RDIMM kit is built for the Supermicro H14DSG-O-CPU motherboard. It delivers 2Rx4 organisation at 1.1V with CL52 latency. The exact-match specification ensures the memory controller recognises the full capacity and runs at the rated speed without manual tuning.

Check motherboard manual for population rules

Server memory support varies by model and BIOS revision. Consult the Supermicro H14DSG-O-CPU manual for approved DIMM population order, maximum supported capacity per slot, and any required firmware updates before ordering. The 288-pin RDIMM form factor is mandatory; UDIMM or SODIMM modules will not fit or function.

Registered ECC architecture

Registered buffering offloads the memory controller so every slot can run fully populated at full capacity, while on-die ECC corrects single-bit errors to prevent silent data corruption. Modules use Samsung, Micron or Hynix DRAM and have no heat spreader, relying on server chassis airflow for cooling. The 288-pin RDIMM connector ensures secure seating in the board's memory slots.

商品特色

  • 96GB capacity supports large server workloads
  • DDR5 6400 speed delivers rated data throughput
  • CL52 latency matches controller timing expectations
  • 2Rx4 registered ECC architecture enables full-slot stability
  • 1V operation meets motherboard voltage requirements

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

Does the 96GB kit include everything needed to install in a Supermicro H14DSG-O-CPU motherboard, or are additional parts required?

The package contains a single 96GB DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM. No extra components are included; the module plugs directly into the board's 288-pin DDR5 RDIMM slots.

Should I choose this 96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM or a different capacity for the Supermicro H14DSG-O-CPU?

This exact part number MR51200-9624K1 is validated for the Supermicro H14DSG-O-CPU. Select it when your configuration calls for a 96GB registered ECC module at 6400 MT/s with CL52 timing.

What does the 6400 MT/s rating mean once the module is running in the Supermicro H14DSG-O-CPU?

The memory controller will operate the DIMM at 6400 MT/s (PC5-51200) with CL52 latency at 1.1 V, delivering the full rated bandwidth and registered ECC stability the platform expects.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。