我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black 40mm square cooling fan with eight wires

OEM Industries

OEM Industries 9CRD0412P5K03 40mm 12V 1.2A 8-Wire Fan

SKU CH-F2TX-RXJHN

40 mm ball-bearing fan runs at 12 V drawing 1.2 A with an 8-wire connector

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • LEDNo
  • 40mm compact fan fits tight CPU cooler spaces
  • Ball bearing design extends operational lifespan
  • 12V 1.2A power rating delivers strong airflow
  • 8-wire interface enables advanced speed control
  • SANYO 4056 model built for demanding cooling

40mm 12V SANYO 4056 Fan

The OEM Industries 9CRD0412P5K03 is a 40mm square fan built around the SANYO 4056 platform. It draws 1.2A at 12V and connects through an 8-wire interface. The black housing uses a ball bearing for rotation. This unit suits technicians replacing a failed cooler fan or integrating targeted airflow into tight industrial enclosures.

Sustained 8-Wire Operation

The 8-wire connection enables continuous speed reporting and PWM control without signal loss during long runs. Ball bearing construction maintains consistent torque and acoustic profile when the fan operates at fixed or variable duty cycles for extended periods. The 12V 1.2A rating delivers stable current draw under load, preventing voltage sag that can stall smaller 2-wire alternatives.

Direct SANYO 4056 Replacement

This model matches the original SANYO 4056 form factor and 8-wire pin-out, so it drops into existing mounts without bracket changes. The upgrade is worth it when the original sleeve-bearing unit develops rattle or fails to report RPM to the controller. Builders needing a 3-wire or 4-wire connector, or a larger frame size, should look elsewhere.

商品特色

  • 40mm compact fan fits tight CPU cooler spaces
  • Ball bearing design extends operational lifespan
  • 12V 1.2A power rating delivers strong airflow
  • 8-wire interface enables advanced speed control
  • SANYO 4056 model built for demanding cooling

商品規格

Model9CRD0412P5K03
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
LEDNo

商品問答

How much heat and noise does the 9CRD0412P5K03 generate when running continuously at 12V 1.2A?

The 40mm ball-bearing fan draws 1.2A at 12V, so sustained operation produces a steady airflow with typical ball-bearing acoustics; actual noise and surface temperature depend on the heatsink it is mounted to and the case airflow around it.

What connector or header must my motherboard provide for the 8-wire lead on this 4056 fan?

The 8-wire cable requires a matching 8-pin PWM or control header; verify your board has that exact pinout before installation.

Will the 40mm 9CRD0412P5K03 clear the taller VRM heatsinks on my older socket 412 board?

At 40mm square the fan sits low, but clearance depends on the specific cooler base and motherboard layout; measure the gap between the CPU socket and the nearest VRM heatsink before fitting.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。