OWC 128GB (4x32GB) DDR5 4800 CL40 ECC RDIMM 2Rx8 1.1V memory upgrade
- 128GB (4 x 32GB)
- 288-Pin DDR5 ECC RD…
OWC
A 128 GB DDR5 ECC registered RDIMM running at 4800 MHz CL40 for HP ProLiant DL320 Gen11, DL380a Gen11 and DX320 Gen11 servers
This 128GB DDR5 registered DIMM is built for HP ProLiant DL320 Gen11, DL380a Gen11 and DX320 Gen11 servers. It delivers error-correcting memory for workloads that cannot tolerate data corruption. The module is not compatible with standard desktop computers or consumer motherboards. Buyers who need unbuffered or load-reduced memory for other platforms must choose a different product.
The stick runs at DDR5 4800 with CL40 latency and 1.1V operation under JEDEC PC5-38400 specification. Registered buffering adds one cycle of address-command delay, which is mandatory for the supported ProLiant platforms. Mixing this module with unbuffered or load-reduced DIMMs will prevent the system from booting. Capacity beyond 128GB per slot requires higher-density parts not covered by this part number.
A 4Rx4 organisation packs the full 128GB into one 288-pin module without a heat spreader, leaving the DRAM exposed for direct airflow in dense server chassis. The registered interface and ECC function are handled by the onboard register and parity logic, so no extra cables or configuration steps are needed. Installers simply seat the DIMM in a compatible slot and the firmware recognises it automatically.
| Brand | OWC |
|---|---|
| Part Number | 4R8D54R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant DL320 Gen11 HP ProLiant DL380a Gen11 HP ProLiant DX320 Gen11 |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
This single 128 GB DDR5 4800 CL40 4Rx4 registered DIMM fills one slot; using it leaves more empty slots for future expansion than populating multiple smaller modules would.
The module runs at DDR5 4800 with CL40 latency at 1.1 V, providing the maximum JEDEC-standard throughput the Gen11 memory controller supports for a 4Rx4 registered DIMM.
The 288-pin registered ECC interface caps transfer rate at PC5-38400 (4800 MT/s) and requires a server chipset that supports registered DDR5; it will not work in unbuffered or consumer platforms.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?