OWC 4GB (2x2GB) DDR2 533 PC2-4200 CL4 240-pin 1.8V Non-ECC UDIMM Kit
- 4GB (2 x 2GB)
- DDR2 533 (PC2 4200)
OWC
A 1 GB DDR2 desktop module rated at 533 MHz with CL4 timing and 1.8 V operation
Capacity 1GB
This OWC module adds one gigabyte of DDR2 memory to a desktop that uses 240-pin unbuffered DIMMs. It is built to JEDEC-standard PC2-4200 timings and runs at the stock 1.8 volt level without ECC or registration. The single-rank 1Rx8 layout keeps the electrical load light for older chipsets.
No heat spreader is fitted, so the module relies on normal case airflow and runs silently. Power draw stays at the JEDEC-defined 1.8 volts, matching the voltage the motherboard already supplies for DDR2. There are no LEDs or active cooling components to add noise or extra current draw.
The module operates at 533 MT/s with a CAS latency of CL4, the exact speed grade labelled PC2-4200. If your system requires this specific DDR2 frequency and timing, the part will slot in and run at its rated settings; if the board needs a different DDR2 speed grade, this module will not match the required specification.
| Brand | OWC |
|---|---|
| Part Number | 4U2D21R801GB |
| Capacity | 1GB |
| Speed | DDR2 533 (PC2 4200) |
| CAS Latency | CL4 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The module runs at DDR2 533 (PC2-4200) with CL4 timing and 1.8V, matching the motherboard specification exactly.
Yes, it uses the 240-pin UDIMM form factor for unbuffered desktop memory.
No, the module is non-ECC and unbuffered, which is typical for consumer desktops.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?