OWC 1GB DDR2 667 PC2-5300 CL5 1Rx8 240-pin 1.8V Non-ECC UDIMM desktop RAM
- 1GB
- DDR2 667 (PC2 5300)
OWC
Dual-channel DDR2 kit delivers 2 GB across two 1 GB modules at 667 MHz with CL5 latency and 1.8 V operation
Capacity 2GB (2 x 1GB)
This OWC kit provides two 1GB DDR2 667 modules for a total of 2GB. It targets owners of older desktops that require PC2-5300 unbuffered non-ECC memory. The 240-pin UDIMMs install in standard desktop slots.
Modules run at the JEDEC-standard 1.8V with CL5 latency. No heat spreaders are fitted, so airflow in the case handles the modest thermal load of DDR2 667. Power draw stays within the base specification for this voltage and speed.
The kit delivers 2GB across two matched 1GB sticks to enable dual-channel operation. This capacity is the deciding factor for systems limited to 1GB per slot or a 2GB maximum.
| Brand | OWC |
|---|---|
| Part Number | 5U3D21R8002P |
| Capacity | 2GB (2 x 1GB) |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Power off the system, open the case, align each module's notch with the slot key, press firmly until both retention clips snap shut, then verify in BIOS that both 1GB sticks are detected at 667 MHz.
No routine maintenance is required; keep interior dust-free and ensure case airflow stays adequate. Replace only if a module fails or the system demands more than the 2GB total capacity.
The CL5 latency at 1.8V and the fixed 667 MHz data rate become the bottleneck before thermal issues arise, since the modules have no heat spreader.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?