我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

OWC

OWC 2TB (8×256GB) DDR4 2933 CL21 ECC Load Reduced LRDIMM Kit for Supermicro H12SST-PS

SKU CH-Q8NQ-97BAW

Eight 256 GB DDR4 2933 CL21 ECC load-reduced DIMMs totalling 2 TB for Supermicro H12SST-PS servers

  • 2 TB total capacity from eight 256 GB modules
  • DDR4 2933 MHz CL21 speed with 1.2 V operation
  • ECC load-reduced design for server and workstation stability
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Backward compatible with 2133, 2400 and 2666 MHz systems

2 TB ECC Load-Reduced DDR4 Kit

This OWC kit provides 2 TB of DDR4 memory across eight 256 GB LRDIMM modules running at 2933 MHz with CL21 latency. It is built for servers and workstations that require error-correcting load-reduced DIMMs rather than standard unbuffered or registered memory.

Check motherboard slot count and memory type

The target board must be the Supermicro H12SST-PS with enough 288-pin slots for eight modules and support for ECC load-reduced DIMMs at 1.2 V. This memory cannot be mixed with unbuffered or ECC registered modules, so all existing DIMMs must be removed or match the same specification.

Sustained operation at rated speed

Each module operates continuously at 2933 MHz (PC4-23400) with CL21 timings and 1.2 V under full load. The load-reduced design reduces electrical loading on the memory bus, helping maintain signal integrity when all eight slots are populated for long-running server workloads.

商品特色

  • 2 TB total capacity from eight 256 GB modules
  • DDR4 2933 MHz CL21 speed with 1.2 V operation
  • ECC load-reduced design for server and workstation stability
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Backward compatible with 2133, 2400 and 2666 MHz systems

商品規格

本商品目前尚未公佈規格。

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What comes in the OWC 2TB DDR4 2933 kit and is anything else required?

The kit contains eight 256GB DDR4 2933 CL21 ECC Load Reduced LRDIMM modules. No extra parts are needed for installation in a compatible Supermicro H12SST-PS system.

Should I choose the 2933MHz speed or a lower speed for my server?

The modules run at 2933MHz (PC4-23400) and are backward compatible with 2666MHz, 2400MHz and 2133MHz. Select 2933MHz if your platform supports it; otherwise the memory will downclock automatically.

What does the 2933MHz CL21 rating mean once the memory is installed?

It indicates a data rate of 2933 MT/s with a CAS latency of 21 cycles. The system will operate at this speed or at the highest supported speed of the platform, up to 2933MHz.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。