我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR3 ECC registered DIMMs in anti-static tray

OWC

OWC 32GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM 4x8GB memory upgrade

SKU CH-FH6X-KD5Y7

32 GB DDR3-1333 ECC registered RDIMM kit (4 × 8 GB) for Dell PowerVault NX300 and NX3000 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • 32GB kit expands server capacity for virtualisation workloads
  • ECC registered design detects and corrects single-bit errors automatically
  • DDR3 1333 CL9 timing matches Dell PowerVault NX300 and NX3000 specifications
  • 5V operation reduces power draw in 24/7 environments
  • Four 8GB 2Rx4 modules populate all channels for balanced bandwidth

Server-grade ECC RDIMM kit

This OWC kit supplies 32GB of DDR3 ECC registered memory in a matched set of four 8GB modules. It is built for Dell PowerVault NX300 and NX3000 storage servers that require 240-pin RDIMMs. The modules carry the 2Rx4 organisation and CL9 timing specified by those platforms. Desktop or unbuffered systems cannot use this memory.

Steady throughput for storage workloads

At 1333 MT/s and PC3-10600 bandwidth the modules deliver consistent data rates during prolonged file transfers and RAID rebuilds. ECC correction detects and fixes single-bit errors without halting the array, while registered buffering reduces electrical load on the memory controller during sustained multi-threaded I/O. The 1.5V operating voltage keeps power draw predictable under continuous duty.

Validated fit for PowerVault bays

Each stick follows the JEDEC 240-pin RDIMM form factor with no heat spreader, allowing direct installation into the NX300 and NX3000 DIMM slots. The kit replaces the listed Dell part numbers, so firmware recognises the modules without extra configuration. Buyers needing unbuffered ECC or non-ECC UDIMMs for workstations or consumer NAS units should select a different product.

商品特色

  • 32GB kit expands server capacity for virtualisation workloads
  • ECC registered design detects and corrects single-bit errors automatically
  • DDR3 1333 CL9 timing matches Dell PowerVault NX300 and NX3000 specifications
  • 5V operation reduces power draw in 24/7 environments
  • Four 8GB 2Rx4 modules populate all channels for balanced bandwidth

商品規格

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerVault NX300
Dell PowerVault NX3000

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much heat does the 1.5V DDR3 1333 kit generate when the Dell PowerVault NX300 runs continuously?

The four 8 GB registered modules operate at the standard 1.5 V without a heat spreader; typical server airflow keeps temperatures within JEDEC limits for continuous duty.

What must the Dell PowerVault NX3000 already have installed to accept this 240-pin ECC registered upgrade?

The system needs a motherboard that supports DDR3 ECC registered DIMMs and free 240-pin slots; unbuffered memory cannot be mixed with this kit.

Can the 2Rx4 PC3-10600 modules run alongside the original Dell A2984886 sticks in a Dell PowerVault NX300?

Yes, they replace Dell part numbers including A2984886 and A2984887, so matching rank, voltage and registered type allows mixed population in the same server.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。