我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with black memory chips and gold edge connectors

OWC

OWC 4GB DDR3 1600 PC3-12800 CL11 ECC UDIMM desktop RAM

SKU CH-8S1G-G5CRE

ECC unbuffered DDR3 desktop memory module with 4GB capacity, 1600MHz speed and CL11 latency for workstations and servers

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 4GB

  • ECC protection prevents data errors in critical workloads
  • 1600 MHz DDR3 speed delivers responsive multitasking
  • CL11 latency supports quick memory access cycles
  • 5 V operation matches standard desktop power requirements
  • 240-pin UDIMM form factor fits compatible workstation and server boards

4GB DDR3 ECC UDIMM for workstations

This OWC module adds 4GB of DDR3 1600 memory with ECC error correction. It runs at 1.5V with CL11 latency in the standard 240-pin UDIMM form factor. The unbuffered design suits desktop workstations, servers and NAS units that require data integrity without registered memory.

Upgrade from non-ECC or lower-capacity DDR3

Replacing standard non-ECC modules with this ECC version adds single-bit error correction for workloads that cannot tolerate silent data corruption. The jump is worth it when the platform supports ECC unbuffered memory and the application demands uptime over raw bandwidth. A single 4GB stick also fills a lone slot on boards limited to one DIMM per channel.

Fits 240-pin DDR3 slots at 1.5V

The module plugs directly into any DDR3 240-pin slot wired for 1.5V unbuffered ECC operation. No heat spreader means it clears tall CPU coolers and dense server chassis without extra clearance planning. It frees a second slot for a matching stick to run dual-channel when the board supports it.

商品特色

  • ECC protection prevents data errors in critical workloads
  • 1600 MHz DDR3 speed delivers responsive multitasking
  • CL11 latency supports quick memory access cycles
  • 5 V operation matches standard desktop power requirements
  • 240-pin UDIMM form factor fits compatible workstation and server boards

商品規格

BrandOWC
Part Number1E6D32R804GB
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 240-pin DDR3 DIMM fit my desktop motherboard?

The module uses the standard 240-pin DDR3 form factor and 1.5V operation, matching JEDEC specifications for compatible desktop, workstation and server boards.

What is the correct way to seat the 240-pin DDR3 module, and what step do people often miss?

Align the notch with the slot key, press firmly until both side clips click shut, then verify the system recognises the full 4GB at 1600 MHz CL11 in BIOS.

When should I consider replacing this ECC UDIMM?

Replace it if memory diagnostics report correctable or uncorrectable ECC errors, if the system fails to POST with the module installed, or if you need capacity beyond 4GB.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。