我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with gold contacts and black memory chips

OWC

OWC 4GB DDR3L 1600 CL11 1Rx8 204-pin 1.35V Non-ECC SODIMM for NCR SelfServ 75 (7705)

SKU CH-BNVP-3VDAP

A 4 GB DDR3L SODIMM running at 1600 MT/s with CL11 latency and 1.35 V operation, built for the NCR SelfServ 75 kiosk

  • Capacity4GB
  • Type204-Pin DDR3L Non-ECC SODIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 4GB capacity expands multitasking headroom for SelfServ 75 kiosks
  • DDR3L 1600 speed matches OEM spec for reliable operation
  • 35 V low-voltage design reduces power draw and heat
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Single 204-pin SODIMM installs easily in the 7705 chassis

Targeted upgrade for NCR SelfServ 75

This 4GB DDR3L SODIMM is built specifically for the NCR Kiosk SelfServ 75 (7705). It delivers a single 4GB module rated at 1600 MHz with CL11 latency. The 1.35V low-voltage design matches the system’s power envelope. It is a direct, warranty-safe replacement for the original memory.

Steady operation at rated speed

The module runs at DDR3L 1600 (PC3L-12800) under continuous load without exceeding JEDEC voltage limits. Unbuffered, non-ECC architecture keeps latency predictable for kiosk workloads. 1Rx8 organisation provides consistent bandwidth for single-channel operation. No heat spreader is fitted, relying on the chassis airflow the kiosk already provides.

Slim 204-pin form factor for tight bays

The 204-pin SODIMM outline fits the narrow DIMM slot in the SelfServ 75 without interfering with adjacent components. Gold-edge contacts meet ROHS and JEDEC plating standards for reliable insertion cycles. Single-rank layout avoids signal integrity issues in the proprietary motherboard. Installation is a straightforward DIY swap with no firmware changes required.

商品特色

  • 4GB capacity expands multitasking headroom for SelfServ 75 kiosks
  • DDR3L 1600 speed matches OEM spec for reliable operation
  • 35 V low-voltage design reduces power draw and heat
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Single 204-pin SODIMM installs easily in the 7705 chassis

商品規格

BrandOWC
Part Number1S6T31R804GB
Capacity4GB
Type204-Pin DDR3L Non-ECC SODIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemNCR Kiosk SelfServ 75 (7705)

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much power does the 1.35V DDR3L module draw when the kiosk runs all day?

The module operates at 1.35 volts, which is the standard DDR3L voltage, so power draw stays within the low-voltage envelope JEDEC defines for continuous use.

What must the NCR SelfServ 75 (7705) already have for this SODIMM to work?

A free 204-pin DDR3L SODIMM slot and a memory controller that supports PC3L-12800 CL11 unbuffered non-ECC memory.

Will this 4 GB 1Rx8 stick work alongside the original memory in the SelfServ 75?

Yes, provided the existing modules are also DDR3L 1600 CL11 1.35 V non-ECC; mixing ranks or voltages can prevent the system from booting.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。