我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

OWC

OWC 8GB DDR3L 1600 CL11 1.35V SODIMM for QNAP 463/563/863 memory upgrade

SKU CH-X83D-S0R70

An 8 GB DDR3L SODIMM running at 1600 MHz with CL11 latency and 1.35 V for compatible QNAP NAS models

  • Capacity8GB
  • Type204-Pin DDR3L Non-ECC SODIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 8GB capacity expands NAS multitasking headroom
  • DDR3L 1600 CL11 speed matches QNAP 463/563/863 specs
  • 35V low-voltage DDR3L cuts power draw
  • 204-pin SODIMM fits TS-463U TS-563 TS-863U bays
  • JEDEC and RoHS compliant for warranty-safe upgrade

OWC 8GB DDR3L 1600 SODIMM

This single 8GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It is built specifically for QNAP TS-463U, TS-463U-RP, TS-563, TS-863U and TS-863U-RP NAS units. The 204-pin unbuffered non-ECC design matches the original QNAP RAM-8GDR3L-SO-1600 part. Buyers needing ECC error correction or larger single-stick capacities cannot use this module.

8GB capacity and DDR3L 1600 headroom

The 8GB stick adds usable memory for multi-user file serving, virtualisation containers and simultaneous backup jobs on the listed QNAP models. DDR3L 1600 bandwidth handles typical NAS workloads without bottlenecking the network link. Systems already at the maximum supported DIMM count or requiring registered memory will not benefit from this upgrade.

JEDEC and RoHS compliance changes the risk profile

Full JEDEC-standard and RoHS compliance means the module meets the original manufacturer specifications for voltage, timing and physical dimensions. This protects the NAS warranty during a user-installable upgrade. The 2Rx8 rank organisation is fixed; builders needing single-rank modules for specific channel population rules must select a different part.

商品特色

  • 8GB capacity expands NAS multitasking headroom
  • DDR3L 1600 CL11 speed matches QNAP 463/563/863 specs
  • 35V low-voltage DDR3L cuts power draw
  • 204-pin SODIMM fits TS-463U TS-563 TS-863U bays
  • JEDEC and RoHS compliant for warranty-safe upgrade

商品規格

BrandOWC
Part Number1S6T32R808GB
Capacity8GB
Type204-Pin DDR3L Non-ECC SODIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-463U
QNAP TS-463U-RP
QNAP TS-563
QNAP TS-863U
QNAP TS-863U-RP

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 1.35V DDR3L SODIMM run reliably alongside the factory 1600 CL11 modules already in my QNAP TS-463U?

Yes — the module matches the 1.35V DDR3L 1600 CL11 specification used by the TS-463U, so it will operate at the same speed and timing as the original memory.

How can I confirm the 8GB 2Rx8 module is recognised at 1600 MHz after installation?

In the QNAP OS open Control Panel → System → Hardware; the memory page will show 8 GB running at DDR3L 1600 (PC3L-12800) with CL11 latency.

Does the single 204-pin SODIMM ship with any tools or thermal pads, or must I source them separately?

Only the 8GB 204-pin DDR3L SODIMM is included; no screwdriver, thermal pad or additional hardware is supplied.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。